Hanns.G HW-191D User Manual

Hanns.G HW-191D User Manual

Lcd display

Advertisement

HW191
HSG1033

Advertisement

Table of Contents
loading

Summary of Contents for Hanns.G HW-191D

  • Page 1 HW191 HSG1033...
  • Page 2 User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
  • Page 4: Recycling Information

    User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.
  • Page 5: Table Of Contents

    User’s Manual TABLE OF CONTENTS SAFETY NOTICE ......................6 PRECAUTIONS.....................6 SPECIAL NOTES ON LCD MONITORS ............7 BEFORE OPERATING THE MONITOR ...............8 FEATURES......................8 CHECKING THE CONTENTS OF THE PACKAGE ........8 INSTALLATION INSTRUCTIONS ..............9 POWER........................9 MAKING CONNECTIONS................10 ADJUSTING THE VIEWING ANGLE............. 11 OPERATING INSTRUCTIONS ................12 GENERAL INSTRUCTIONS................12 FRONT PANEL CONTROL ................13 HOW TO ADJUST A SETTINGS ..............14...
  • Page 6: Safety Notice

    User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
  • Page 7: Special Notes On Lcd Monitors

    User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the • Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 8: Before Operating The Monitor

    User’s Manual BEFORE OPERATING THE MONITOR FEATURES 19” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 1440 X 900@60Hz • ® EPA ENERGY STAR • Ergonomic Design • Space Saving, Compact Case Design •...
  • Page 9: Installation Instructions

    User’s Manual INSTALLATION INSTRUCTIONS Install Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4.
  • Page 10: Making Connections

    User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 2.
  • Page 11: Adjusting The Viewing Angle

    User’s Manual ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, and then adjust the • monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. •...
  • Page 12: Operating Instructions

    User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preference.
  • Page 13: Front Panel Control

    User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF monitor’s power. • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. Turn the OSD menu on/off or return to the previous menu. 2.
  • Page 14: How To Adjust A Settings

    User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/CONTRAST Adjust the brightness value of the display according to your preference. Select「BRIGHTNESS」option to adjust the BRIGHTNESS brightness value. Adjust the contrast value of the display according to your preference. Select「CONTRAST」option to adjust the contrast CONTRAST value.
  • Page 15 User’s Manual Select the 「H-POSITION」 option to shift the screen image to the H-POSITION left or right. Enter the option and adjust the level. [For VGA only] Select the 「V-POSITION」 option to shift the screen image up or V-POSITION down. Enter the option and adjust the level. [For VGA only] Select the 「CLOCK」option to reduce the vertical flicker of CLOCK...
  • Page 16 User’s Manual 「OSD COLOR」 option under 「OSD SETTING」 menu, choose modes 1/2/3. SYSTEM While transferring via the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is AUDIO INPUT recommended to select AUDIO INPUT as PC, and make sure the PC audio output cable is connected to monitor’s LINE IN (or AUDIO IN) port.
  • Page 17: Plug And Play

    User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
  • Page 18: Technical Support (Faq)

    User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION *Check if the Power Switch is in the ON position. Power LED is not on *Power Cord should be connected. *Check if the PC system is Plug & Play compatible. *Check if the Video Card is Plug &...
  • Page 19 User’s Manual and make sure PC audio output cable is connected to monitor's LINE IN port(or AUDIO IN port). [For HDMI Input only]...
  • Page 20: Error Message & Possible Solutions

    User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT: Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.
  • Page 21 User’s Manual 1280×1024 @60Hz SXGA 63.981 60.02 1280×1024 @72Hz SXGA 76.02 71.448 1280×1024 @75Hz SXGA 79.976 75.025 1360×768 @60Hz SXGA 47.712 60.015 1400×1050@60Hz WXGA + 64.744 59.948 1400×1050@60Hz WXGA + 65.317 59.978 1440×900 @60Hz SXGA 55.469 59.901 1440×900 @60Hz SXGA 55.935 59.887 1440×900 @75Hz SXGA...
  • Page 22: Appendix

    User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 19” Pixel pitch 0.285mm(H) x 0.285mm(V) H-Frequency 24.8KHz – 82KHz Video V-Frequency 56Hz– 76Hz Display Colors 16.7M Colors Max. Resolution 1440 x 900 @75Hz VESA DDC2B Plug & Play ON Mode ≤42W ®...

This manual is also suitable for:

Hw-191dpbHw191

Table of Contents