Reboot; Password - TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in User Manual

4.16.6 Reboot

Choose menu "System Tools → Reboot", you can click the Reboot button to reboot the Router
via the next screen.
Some settings of the Router will take effect only after rebooting, which include:
•
Change the LAN IP Address (system will reboot automatically).
•
Change the DHCP Settings.
•
Change the Wireless configurations.
•
Change the Web Management Port.
•
Upgrade the firmware of the Router (system will reboot automatically).
•
Restore the Router's settings to factory defaults (system will reboot automatically).
•
Update the configuration with the file (system will reboot automatically.

4.16.7 Password

Choose menu "System Tools → Password", you can change the factory default user name and
password of the Router in the next screen as shown in Figure 4-79.
It is strongly recommended that you should change the factory default user name and password
TL-WR740N/TL-WR741ND
Figure 4-78 Reboot the Router
Figure 4-79 Password
- 87
-
150Mbps Wireless N Router