Security - TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in User Manual

Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable
button.
Current UPnP Settings List - This table displays the current UPnP information.
App Description - The description provided by the application in the UPnP request.
•
External Port - The external port the Router opens for the application.
•
Protocol - The type of protocol the Router opens for the application.
•
Internal Port - The Internal port the Router opens for local host.
•
IP Address - The IP address of the UPnP device that is currently accessing the Router.
•
Status - The status of the port is displayed here. "Enabled" means that the port is still
•
active. Otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.

4.9 Security

Figure 4-37 The Security menu
There are four submenus under the Security menu as shown in Figure 4-37: Basic Security,
Advanced Security, Local Management and Remote Management. Click any of them, and you
will be able to configure the corresponding function.
TL-WR740N/TL-WR741ND
Figure 4-36 UPnP
- 55
-
150Mbps Wireless N Router