TP-Link TL-WR720N User Manual page 32

TL-WR720N 150Mbps Wireless N Router
The default value is "0". You can input the value between "0"and "120". The value "0" means
no detect.
DNS IP address - If your ISP does not automatically assign DNS addresses to the Router
during login, please click "Use the following DNS servers" check box and enter the IP
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS
server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select
BigPond Cable. And you should enter the following parameters (Figure 4-11):
Figure 4-11 WAN – BigPond Cable
User Name/Password - Enter the User Name an d Password provided by your ISP. These
fields are case-sensitive.
Auth Server - Enter the authenticating serv er IP address or host name.
Auth Domain - Type in the domain suffix server name based on your location.
e.g.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpo nd.net.au
QLD - qld.bigpond.net.au
-24-