Getting To Know Your Router; Front Panel - Belkin F9K1105 User Manual

GeTTInG TO KnOW YOUR ROUTeR

front Panel

A
B
a) Router status light
Your Router's status is shown by the light on the front.
Off: The Router is not plugged into a power source.
blinking blue: The Router is starting up.
solid blue: The Router is connected to the Internet.
blinking amber: The Router can't detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, see "Getting Started > Adding
Computers to Your Network > Using the WPS Button".
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
blinking blue: The Router is listening for a WPS-
enabled computer or other device.
solid blue: The Router has made a secure
connection with the computer or other device.
amber: A connection was not created.
21