Chapter 3 Quick Installation Guide; Configure The Pc - TP-Link TL-WA730RE User Manual

Chapter 3 Quick Installation Guide

This chapter will guide you to configure your PC to communicate with the AP and to configure and
manage the TL-WA730RE 150Mbps Wireless Range Extender easily with a Web-based utility.

3.1 Configure the PC

The wireless adapter-equipped computers in your network must be in the same IP Address range
without overlap with each other. Manually configure the IP address as 192.168.1.* (* is any
integer between 1 to 253), and the Subnet mask as 255.255.255.0 for your PC by following the
instructions below.
Connect the local PCs to the LAN ports on the AP and configure the IP address manually for your
PCs.
1. Click Start (in the lower left corner of the screen), right-click My Network Connections and
choose Properties.
2. On the My Network Connections window shown as Figure 3-2 below, right-click LAN (Local
Area Connection) and choose Properties.
TL-WA730RE 150Mbps Wireless Range Extender User Guide
Figure 3-1
9