Sign in today to find solutions:

Don't have an account? Sign up

Next page ->

Summary of Contents

  • Page 2

    Re-type password: Type the password again. Alias: Give an alias for the account of your IP Camera. The figure above takes “TL-SC3130G” for example. Port range: Enter the port range used. IP Notification: When this feature is enabled, the IP camera would notify "friends" on MSN about its IP address when it logs into the MSN account or when its IP address is changed.

  • Page 3

    Allow list: Enter the account of the MSN user you want communicate with in “User” field. Click Add button and then the account will be added to the “Allow list”. Choose an account in the “Allow list” and click Remove button to delete it. To use MSN to view the video captured by the IP camera, please follow the steps below.

  • Page 4

    Make sure the MSN view plugin is installed. This plugin is embedded in IntelligentIPInstallerSetup(TPLink)- and will be installed automatically when you install IntelligentIPInstallerSetup(TPLink)- ▲ You can download the IntelligentIPInstallerSetup(TPLink)- here: Log into your MSN account. Add the camera’s MSN account as a contact.

  • Page 5

    Check its status. Normally it should be online. Click the camera icon and select View a contact’s webcam to view the video.

  • Page 6

    Wait for a moment, and you will see the video captured by your IP Camera.

Comments to this Manuals

Symbols: 0

Latest comments:


Select the desired size and copy embed code

Copy your embed code and put on your site: