Dish Network VIP 722 User Manual page 15

Tips
• You can use the Front Panel Locks to prevent the mode from being changed
accidentally. See page 49 for instructions.
• The only way to turn off the TV2 outputs is by pressing POWER on Remote
Control 2.
• In Dual Mode, Remote Control 1 is used to control TV1 menus on the nearby TV. Remote
Control 2 is used to control TV2 menus on the remote TVs.
• If you would like to put the receiver in a remote location (such as a closet or cabinet), be sure
to get the replacement remote control that uses UHF Pro signals to control TV1. Call your
DISH Network retailer or go to www.dishnetwork.com, select Our Products, and then click on
Accessories.
• If you do not do anything in a menu for several minutes, the menu automatically closes. This
will discard any changes you made, and display the program you were watching.
• To use Remote Control 2, be sure to attach the Remote Control Antenna. See page 17 for
details.
• On Remote Control 2, press FORMAT/* to change the aspect ratio (display shape) of HD
channels displayed on remote TV(s).
Questions
• Why put the receiver in Single Mode? When the receiver is in Single Mode, you can use the
PIP functions.
• How can I watch and use the DVR functions on the same program on all of the TVs in
my house? Put the receiver in Single Mode (page 15) and then enable Shared View
(page 88).
Satellite Receiver
Tips
25