Table of Contents
Advertisement
7.
Repeat steps 1 through 6 to set up a new component
under AV2 (or AV1).
8.
For future reference write down the working code for
the component(s) set up under AV1 and AV2 below:
AV1:
COMPONENT: ___________________
AV2:
COMPONENT:___________________
SEARCHING FOR TV, AV1 OR AV2 CODES
If you were unable to find the code for your brand of TV or
component, you can try a code search. This process may
take up to 30 minutes.
1.
Turn on the TV or component. Insert a tape or disk if
applicable.
Slide the MODE switch to the TV, AV1 or AV2 position,
2.
as desired.
3.
Press and hold the MUTE and SELECT keys at the same
time until the green light under the selected switch
position flashes twice, then release both keys.
4.
Enter 9-9-1 followed by one of the following four-
digits:
COMPONENT TYPE
Satellite
TV
VCR/DVD/PVR
Stereo
Press PWR, or other functions (e.g. PLAY for VCR) you
5.
want to use.
6.
Point the remote at the TV or component and press
CHAN . Repeatedly press CHAN
component turns off or performs the action you
selected in step 5.
NOTE:
Every time CHAN
advances to the next code and power is trans-
mitted to the component.
COMPONENT ID #
is pressed the remote
10
0
1
2
3
until the TV or
Hide quick links:
Advertisement
Table of Contents
