Table of Contents
Advertisement
the next set, and so on. Because of this, it is important to cascade your FireStudio interfaces in the
proper order from your computer so that you know which input belongs to which unit.
Please note: The order of the inputs and outputs in your FireStudio chain cannot be altered.
You may wish to give each unit a custom name. To do so, simply double-click on the name badge on
each unit's Device Window button to open a text box. Once you have typed the custom name, hit the
Enter key.
If you are using two or more different FireStudio family interfaces, make sure to reconnect them in the
order that their individual Device Window Buttons appear in the Launch window. Connecting your units
in this order will produce the best performance and will put your inputs and outputs in the correct order.
It is important to mention that the inputs and outputs on each unit in the chain are independent from one
another. This means that you cannot monitor the inputs from the first unit in the chain through the outputs on
the second unit in the chain unless you create a mix from within your DAW application. To easily maintain zero-
latency mixing between the daisy-chained units, dedicate a set of outputs and a set of inputs from each device in
the chain to send and receive a mix in the Universal Control application.
CASCADING UNITS
31 | PreSonus 2008
Advertisement
Table of Contents
