Registry And File Criteria - Cisco 5520 - ASA IPS Edition Bundle Configuration Manual

Defining Location Criteria
If the client has more than one network card, CSD uses only the address of the first card detected.
Note

Registry and File Criteria

Check Enable identification using registry or file criteria in the Identification for <Location> pane
(Figure
obtain the access rights associated with the location you are configuring, and click Configure Criteria.
The Registry and File Criteria dialog box opens
Figure 5-3
The tables in this window list any registry key and file requirements needed to qualify a remote client to
obtain the access rights associated with the location you are configuring. Each entry is a logical OR
operator (that is, the evaluation result for any entry must be TRUE to assign the location.
Note To view details in the Registry Criteria or File Criteria tables, float the cursor over the column header
divider. As you do so, it becomes a double, horizontal arrow. Drag the arrow to the left or right to expose
the contents of the column.
Refer to the section that identifies the type of criteria you would like to configure:
•
•
Cisco Secure Desktop Configuration Guide
5-8
5-2) if you want to specify registry key or file criteria to match to qualify a remote client PC to
Registry and File Criteria
Registry Criteria
File Criteria
Chapter 5 Setting Up CSD for Microsoft Windows Clients
(Figure 5-3).
OL-8607-02