Table of Contents
Advertisement
Programming Lock
The programming lock is to prevent unauthorized programming and water temperature adjustments. When
the programming lock is engaged, all programmed or default functions will operate normally. Also, the hot tub
user may operate the pumps, the hot tub light or view the time-of-day, but no programming changes may be
made. When the programming lock is enabled, the Digital Display Window will scroll "PROGRAMMING
LOCKED" twice on the lower left side of the display, then a lock icon will be displayed on the right side of
the Digital Display Window To enable the programming lock, all the following buttons must be pushed within
3 seconds:
1.
Push the Dimension One Spas ICON (logo)® Button.
2.
Push the Dimension One Spas ICON (logo)® Button.
3.
Push the PROGRAM Button.
Programming Unlock
To unlock the Panel: The following buttons must be pushed within 3 seconds:
1.
Push the ENTER Button.
2.
Push the ENTER Button.
3.
Push the Dimension One Spas ICON (logo)® Button.
When the last Button is pushed all buttons will be active.
Control Panel Reset
This function is used to completely reset the clock and all other system variables to the factory defaults. Please
keep in mind that this resets all maintenance messages (clean filters, change water, etc.) as if the hot tub is
being installed the day of the panel reset. To reset the control system all of the following buttons must be
pushed within 3 seconds:
1.
Push the ICON (logo) Button
2.
Push the ENTER Button
3.
Push the PROGRAM Button
The top line of the Digital Display Window will read "RESET PROGRAMMING?"
The bottom line of the Digital Display Window will read "IF SO, PUSH ICON"
4. Push the Dimension One ICON Button to reset the entire control system to factory defaults or do
not touch a button for 10 seconds to exit.
2003 Sarena Bay™
Export Owner's Manual
31
Hide quick links:
Advertisement
Table of Contents
