MSI GF615M User Manual page 24

User guide
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
dCt unganged Mode
this feature is used to integrate two 64-bit dCts into a 28-bit interface.
Bank interleaving
Bank interleaving is an important parameter for improving overclocking capabil-
ity of memory. it allows system to access multiple banks simultaneously.
Power down enable
this is a memory power-saving technology. When the system does not access
memory over a period of time, it will automatically reduce the memory power
supply.
MemClk tristate C3/atLVid
this setting allows you to enable/disable the MemClk tristating during C3 and
atLVid.
FSB/dRaM Ratio
this item will allow you to adjust the ratio of FSB to memory.
adjusted dRaM Frequency (MHz)
it shows the adjusted memory frequency. Read-only.
Ht Link Speed Configuration
Press <enter> to enter the sub-menu.
Ht Link Speed auto
Setting to [enabled], the system will detect the Ht link speed automatically.
Ht Link Speed
this item allows you to set the Hyper-transport Link speed.
adjust PCi-e Frequency (MHz)
this item allows you to adjust the PCi-e frequency.
auto disable dRaM/PCi Frequency
When set to [enabled], the system will remove (turn off) clocks from empty diMM
and PCi slots to minimize the electromagnetic interference (eMi).
dRaM Voltage (V)/ nB Voltage (V)/ Ht Link Voltage (V)
these items are used to adjust the voltage of CPu, Memory and chipset.
CPu/Ldt Spread Spectrum
this setting is used to enable or disable the CPu/Ldt (Ht Bus multiplier) Spread
Spectrum feature.
PCie Spread Spectrum
this setting is used to enable or disable the PCie Spread Spectrum feature.
Sata Spread Spectrum
this setting is used to enable or disable the Sata Spread Spectrum feature.
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents