3-8-1.1 Irqs Activities; Pnp/Pci Configuration Setup - JETWAY P4MDMR7A User Manual

M/b for socket 478 pentium 4 processor

Hide thumbs

Table Of Contents

Table of Contents

VGA

LPT & COM

HDD & FDD

PCI Master

Wake-Up on Ring/LAN

Wake-Up on PCI PME

Wake-Up on RTC Alarm

x Date of Month Alarm

x Time (hh:mm:ss) Alarm

> IRQs Activities

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit

F5:Previous Values

Wake Up On Ring/PME

During Disabled, the system will ignore any incoming call from the modem. During Enabled,

the system will boot up if there's an incoming call from the modem.

Wake-Up on RTC Alarm

This function is for setting date and time for your computer to boot up. During Disabled, you

cannot use this function. During Enabled, choose the Date and Time Alarm:

Date(of month) Alarm

You can choose which month the system will boot up. Set to 0, to boot every day.

Time(hh:mm:ss) Alarm

You can choose what hour, minute and second the system will boot up.

Note: If you have change the setting, you must let the system boot up until it goes to the

operating system, before this function will work.

IRQs Activities

Please refer to section 3-8-1.1