Sign in today to find solutions:

Don't have an account? Sign up

 
DW788/383329
8/6/02
10:35 AM
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW788
20" (508 mm) Heavy Duty Variable Speed Scroll Saw
Scie à découper de service intensif de 508 mm (20 po) à régulateur de vitesse
Sierra caladora de 508 mm (20") con velocidad variable para trabajo pesado
Page 3
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.

Summary of Contents

  • Page 1

    MANUAL DE INSTRUCCIONES DW788 20" (508 mm) Heavy Duty Variable Speed Scroll Saw Scie à découper de service intensif de 508 mm (20 po) à régulateur de vitesse Sierra caladora de 508 mm (20") con velocidad variable para trabajo pesado INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA...

  • Page 2

    1-800-4-D WALT (1-800-433-9258) WARNING: FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING SAW • DO NOT WEAR GLOVES, NECKTIES, JEWELRY OR LOOSE CLOTHING • CONTAIN LONG HAIR • ALWAYS WEAR EYE PROTECTION • INSTALL BLADE WITH TEETH POINTING DOWNWARD TOWARD THE TABLE BEFORE OPERATING SAW • MAINTAIN PROPER ADJUSTMENT OF BLADE TENSION BLADE GUARD BEFORE OPERATING SAW •...

  • Page 3

    DW788/383329 8/6/02 10:35 AM Page 1 WARNING: For your own safety read instruction manual before operating tool. Grounding Instructions In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.

  • Page 4

    FINGERS OR HANDS IN PATH OF THE SAW BLADE. • WHEN REMOVING short workpieces, or cleaning up around the table, be sure the saw is in the OFF position and blade has stopped moving. • NEVER turn the saw ON before clearing the table of all tools, wood scraps, etc., except the workpiece and related feed or support...

  • Page 5

    SAVE THESE INSTRUCTIONS Mounting Three holes are provided in the base of the scroll saw to facilitate mounting to a table or bench (Figure 1). Always mount your saw firmly to prevent movement. FIG. 1...

  • Page 6

    The proper degree of tension varies with different blade sizes. If you are frequently breaking blades, decrease tension on the blade. As you become more accustomed to operating your scroll saw, you will become more proficient in fine-tuning blade tension. Practice on scrap material when possible.

  • Page 7

    On/Off Switch BLADE TENSION LEVER To turn the scroll saw on, press the front of the switch as shown in Figure 8.The saw locks on automatically. To turn the tool off, press the FIG. 6 back of the switch. A hole is provided in the switch for insertion of a padlock to lock the saw off (Figure 8).

  • Page 8

    Beveling The table of your scroll saw bevels 45° left and right. A detent is set at 0°. To bevel the scroll saw table, loosen the bevel lock knob (Figure 9), and bevel the table to the desired setting, indicated by the bevel pointer.

  • Page 9

    Overload Protector FIG. 10 Your scroll saw is equipped with a 3 amp overload protection fuse. If your scroll saw becomes overloaded and stops operating, turn off the scroll saw, check for a blown fuse by removing the fuse cap (Figure 11).

  • Page 10

    Accessories Use only 5" plain end scroll saw blades. Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory for your tool, contact: WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: