Page of 104

Kenwood KVT-514 - Wide In-Dash Monitor Instruction Manual: Security Code Setup

Owners manual.
Also See for KVT-514 - Wide In-Dash Monitor:
Instruction manual - 117 pages
Setup Menu

Security Code Setup

You can set a security code to protect your
receiver system against theft.
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1
Display the Security Code Setup screen
Touch
Menu" screen (page 62).
1
2
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "ON", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
"ON")
2
Start Security Code setup
• If you have already completed the code registration,
is displayed.
3
Enter a security Code
Input four-digit number.
76
KVT-514/KVT-534DVD
4
5
in the "Setup
• If you enter a different security code, the screen returns
6
Register your security code
Reenter the security code
Reenter the same security code as that you
have entered in Step 3 for confirmation.
to Step 3 (for the first code entry).
Register the security code again
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.

   Also See for Kenwood KVT-514 - Wide In-Dash Monitor

   Related Manuals for Kenwood KVT-514 - Wide In-Dash Monitor

Comments to this Manuals

Symbols: 0
Latest comments: