Frequency Search Function; Switching The Hd Radio™ Signal; Cd/Mp3/Wma; Playback - Alpine CDA9857 Owner's Manual

Mp3/wma cd receiver
Hide thumbs Also See for CDA9857:
Table of Contents

Advertisement

Available languages

Available languages

Frequency Search Function

You can search for a radio station by its frequency.
1
Press and hold
for at least 2 seconds in Radio
mode to activate Frequency Search mode.
2
Turn the Rotary encoder to select the desired
frequency.
Only when the Radio mode is active
* Operation is not required during HD Radio reception.
3
Press MODE to receive the selected frequency.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or the search mode will be canceled when an operation has
not been performed in 10 seconds.
Switching the HD Radio™ signal
HD Radio™ can be received if the HD Radio TUNER MODULE
(TUA-T500HD) is connected. While receiving HD Radio, the unit can
automatically switch between the analog and digital signal. You can
also switch to the analog signal exclusively.
1
When receiving HD Radio, press FUNC.
The currently received status is displayed.
2
Press preset 1 to switch the receiving signal.
DIGITAL / ANALOG
ANALOG ONLY
DIGITAL / ANALOG:
Automatically switches between digital and
analog signal
ANALOG ONLY:
Receives analog signal only
3
Turn off the Function mode by pressing FUNC.
• Select mode will be canceled when an operation has not been
performed in 10 seconds.
*

Playback

1
2
*
*
*
3
4
Returning to the beginning of the current track (file):
Fast backward:
Advancing to the beginning of the next track (file):
Fast forward:
5
6
• Do not remove a CD during its eject cycle. Do not load more than

CD/MP3/WMA

(OPEN)
SOURCE/
Rotary
POWER
encoder
MODE
Press
(OPEN).
The front panel will open.
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the DISC mode.
1
TUNER
XM/SIRIUS*
TUNER
1
Only when XM Radio or Sirius Radio is connected.
2
Only when the iPod is connected.
3
Only when the CD changer is connected.
While playing back MP3/WMA, press
select the desired folder.
Pressing and holding
or
continuously.
Press
or
to select the desired track (file).
Press
.
Press and hold
.
Press
.
Press and hold
.
To pause playback, press
Pressing
/
again will resume playback.
After pressing
(OPEN) to open the front panel,
press
to eject the disc.
one disc at a time. A malfunction may result from doing either.
/
FUNC.
4 5
TITLE
2
DISC
iPod*
CHANGER*
or
to
will change folders
/
.
9
-EN
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents