HighPoint ATA-133 RAID User Manual page 23

Just highlight the target disk and press ENTER to select it;
2. Then the warning message will appear, see below:
Please pay much attention to the warning message, and then press Y to
use that disk to rebuild, or press N to cancel. If user press Y, then all
the data on all the selected disk will be destroyed;
3. Next, BIOS will replace data onto the newly added disk, see below:
User can press ESC to cancel the duplicating process at anytime.
4. Continue to Boot
This command will let BIOS to skip the problem and boot into OS.
2-9
BIOS Configuration Utility