HighPoint ATA-133 RAID User Manual page 10

Introduction
Manual Installation
If Windows can not find new hardware, the driver should be manually installed
through the following steps :
1. Click Start-->Settings-->Control
Hardware. In the follow-up window, Click
2. In the follow-up window, select the first item
then click Next
3. In the follow-up window of device list, select the first item
Device, then click
4. Then the system will ask whether to let Windows to search new hardware.
Please select No, I want to select the hardware from a
Next to continue;
5. In the follow-up window of device types, select
controllers, then click
6. In the follow-up window, select
7. Please insert the driver diskette and input the path of driver location:
A:\Win2000 into
OK; (if users install driver from CD make sure input the correct path,
for example D:\HPT370\Driver\Win2K)
8. In the follow-up window, select
troller or HPT372 UDMA/ATA 133 RAID
9. Follow the system prompts to finish driver installation, and restart the
computer.
Install driver during the process of Windows 2000 installation
1. If Windows 2000 is installed from diskette booting , please let the install
program run automatically. If Windows 2000 is installed from the CD-
ROM,
please F6 key when the message
party SCSI or RAID driver
after files have been copied and the computer restarted, press
the message Setup is inspecting your computer's hardware configura-
tion appears;
2. Press S key to specify additional devices when the
window appears;
3. In the follow-up window for selecting device type, please select
and press ENTER to continue;
4. Insert the driver disketee, then press ENTER to continue;
5. The system will ask whether to install driver for
2000, please select to install driver for
6. The follow-up window will list out the devices to be installed, in which
HPT370/372/372A ATA RAID Controller
Panel, double click
to continue;
Next to continue;
Next to continue;
Have Disk...;
Copy manufacturer's files from:
HPT370 UDMA/ATA100 RAID Con-
Press F6 if you need to install a third
appears. If start installation by typing Winnt,
Windows
Add/Remove New
Next to continue;
Add/Troubleshoot a device,
Add New
list. then click
SCSI and RAID
column, then click
Controller;
F6 key when
Windows 2000 Setup
Other
WinNT or for Windows
2000;
item should be included;( If
1-6