Advertisement
Quick Links
Application
243.95MHz PHS Base-Station 1st IF
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Nominal Center Frequency (f0)
3dB Band Width
Insertion Loss at f0
Ripple
Group Delay Time Ripple
Attenuation
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Item
Maximum Input Power
Operating Temperature Range
Storage Temperature
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.5x3.5x1.0[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html (English)
JRC SAW FILTER
NSVS1097
f0±100kHz
f0±100kHz
f0±600kHz
f0±10.7MHz
f0±21.4MHz
Communications Equipment Division
Communications Equipment Marketing Department
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
243.95MHz
±130kHz
4.0dB
0.85dB
0.85us
-
25dB
50dB
60dB
(Operating Temperature Range : -30• ` +85• Ž )
Rating
+5dBm
-30~+85ºC
-40~+95ºC
3
] for SMD (Surface Mount Device) type.
NSVS1097 Jan. 2005
Typ.
-
-
3.3dB
0.40dB
0.40us
-
30dB
65dB
65dB
Advertisement
Related Manuals for JRC NSVS1097
Summary of Contents for JRC NSVS1097
- Page 1 NSVS1097 Jan. 2005 JRC SAW FILTER NSVS1097 Application 243.95MHz PHS Base-Station 1st IF Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1. Table 1. Electrical Specifications Item Spec. Typ. Nominal Center Frequency (f0) 243.95MHz 3dB Band Width ±130kHz...
- Page 2 NSVS1097 Jan. 2005 Ω 50 Ω Fig.1 Measuring circuit 3. 5• } 0.2 ( a) ( c ) ( 1) (2 ) Marking (1) Lot Number Year ( 0. 95) (0.8) Month [ 5x ] Oct. --- X Nov. --- Y Dec.
- Page 3 NSVS1097 Jan. 2005 Notice 1. Use this component within operating temperature range. It might not be satisfied with electrical specification without operating temperature range. When it is used less than –30ºC or more than +85ºC, it might be a cause of degradation or destruction of the component.
- Page 4 NSVS1097 Jan. 2005 TZY2Z2R5A001B00 TZY2Z2R5A001B00 0.65 - 2.5 pF 0.65 - 2.5 pF L Q W 18ANR10G00D LQ W 18ANR10G00D 100nH 100nH S A W Ω IN 50Ω TZY2Z2R5A001B00 TZY2Z2R5A001B00 0.65 - 2.5 pF 0.65 - 2.5 pF Fig. 4...