Trans/Pan; Changing Parameters - American Audio RADIUS 3000 User Manual And Reference Manual

BUILT-IN EffECTS
PAN EFFECT: The Pan effect allows you to pan the output from the left
channel to the right channel. The PT will adjust the amount of time the
pan effect is in each channel (left and right). The PR will adjust the the
time it takes to switch from the left channel to the right channel.
HOLD BUTTON: Use the hold Button (26) to lock your parameters.
If the hold button is not activated any changes to your parameters will
be momentary. To activate the hold function press the hold Button
(26) as in figure 51. When the hold function becomes activated, the hold
button will begin to glow blue.
©
TRANS EFFECT: The Trans effect simulates a real-time mixer transform-
er effect. The Trans effect has two adjustable parameters, Parameter
Time and Parameter Ratio. The PT will adjust the Trans Speed and The
PR will adjust the Trans Audio Length.
Figure 48
pARAmETERS:
All the effects have adjustable parameters. The parameters change
the way the effects will react. To adjust the parameter values for any
of the effects, turn either of the two parameter knoBS (25 or 31).
When the parameter value is adjusted the VFD display will indicate
the parameter adjustment. All effects have two adjustable parameters.
parameter time (31) and parameter ratio (25). Use these knobs
to customize the effects to your liking. For quick adjustment press and
turn either of the knobs. You can also adjust the parameters using the
jog wheel. Make sure the jog Wheel (9) is in NORMAL mode, and
then press and hold the knob of the paremeter you wish to adjust and
turn the jog wheel to make your adjustment.
Figure 50
American Audio - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 33
®
Figure 49
Figure 51