Related Manuals for American DJ PRO-DJ2S
Summary of Contents for American DJ PRO-DJ2S
- Page 1 PRO-DJ2 front load professional single CD player featuring: Seamless Loop, Fader “Q” Start, BOP Effect, Flip Flop and Digital Output © American DJ AUDIO Los Angeles, CA 90058 USA ®...
- Page 2 NOTE: IMPORTANT SAFETY ITEMS FOR This CD player uses a semiconductor laser. U.S.A. & CANADA MODEL ONLY It is recommended for use in a room at the WARNING: following temperature: 41˚F - 95˚F / 5˚C - 35˚C TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO CAUTION WATER OR MOISTURE.
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS I. Read Instructions - All the safety and operating 10. Power-Cord Protection - Power-supply cords instructions should be read before the appliance should be routed so that they are not likely is operated. to be walked on or pinched by items placed upon or against them, paying particular 2. -
Page 4: Functions And Controls
FUNCTIONS AND CONTROLS PRO DJ 2 Control Layout Figure 1 Direct Track Access Buttons (1-10) - These buttons are used to select a starting track. They are also used in Memory (2) and Recall (3) modes for cue points. Memory - This button is used to program up to 10 cue points per a CD in to the Direct Track Access Buttons (1-10) Press the Memory (2) button during play or pause, the memory LED lights up. - Page 5 FUNCTIONS AND CONTROLS CONT. JOG WHEEL - (INNER RING) This jog wheel serves two functions depending on the mode you are working in. a. The jog wheel will act as a slow frame search control when the CD is not playing but either paused or set to a cue point.
-
Page 6: Play Indicator
FUNCTIONS AND CONTROLS CONT. SINGLE INDICATOR - This indicates that the player is in single play mode. Playback will stop and cue at the beginning of the next track. PROGRAM INDICATOR - This lights when in program is selected or program play is selected. PLAY INDICATOR ( ) - The PLAY indicators light during playback. -
Page 7: Main Features
MAIN FEATURES 8 times over sampling 1 bit D/A converter wide angles. Auto cue (13) 60 seconds transport protection (b) 1/75th second frame search (14) Seamless Loop Realtime cue (“Cue on the Fly”) (15) CD Recordable (CDR) compatible 6 different speed scan (16) Flip-Flop, Relay Playback when used in pairs (c) Pitch display... -
Page 8: Basic Operations
BASIC OPERATIONS 1. OPENING AND CLOSING THE DISC TRAY AND LOADING DISCS • This operation only works when the power is on. • Press the OPEN/CLOSE BUTTON (4) to open or close the disc tray, or, Press PLAY BUTTON (11) to close the tray automatically when it is open. - Page 9 BASIC OPERATIONS (CONT.) 8. AUTO CUE • When disk is loaded, the cue point is set to the first source of music. If track is changed before pressing play, the CUE POINT is changed to the new starting point. If you pause during playback this also sets the new CUE POINT.
-
Page 10: Before Switching Off The Power
BASIC OPERATIONS (CONT.) 16. PROGRAM PLAY (1) Press the PROGRAM BUTTON (19) to make the unit enter the program mode in stop position. The PROGRAM INDICATOR (29)LED above the PROGRAM BUTTON (19) will light as well as the PROGRAM INDICATOR (29) on the LCD DISPLAY (15). (2) Select a Track by using the DIRECT TRACK ACCESS BUTTONS (1) , press PROGRAM BUTTON (19) again. -
Page 11: Specifications
SPECIFICATIONS GENERAL: Type: Twin mechanism compact disc player with wired controller. Disc type: Standard compact discs (5 in / 12cm and 3in/8cm discs) Dimensions: Player unit: 19"(W) x 3 15/32” (H) x 9 55/64” (D) Installation: Table-top mount Weight: 6 lbs. / 2.4 kgs Power supply: 110~120v/220~240v AC, 50/60Hz Power consumption:... - Page 12 Q-2221 “Q-DECK” USER INSTRUCTIONS djs wanted.
- Page 13 Q-2221 “Q-DECK” Featuring Fader “Q” Start Main Features • 2 phono, 2 line, 2 auxiliaries, & 1 microphone input • Hamster Switch for changing cross fader position • 100% cut buttons for treble, mid and bass of each channel • Fader "Q" Start w/ On/Off switch (for use with the American DJ CD Players with Fader "Q" Start) •...
- Page 14 Index • Safety Instructions..................p.3 • Operating Determinations...............p.4 • Connections.....................p.4 • Functions (Front Panel)................p.5-6 • Inputs & Outputs (Rear Panel)............p.6-7 • Replacing the Crossfader...............p.7 • Changing the Transformer Switch............p.7 • Technical Specifications.................p.7 • Warranty & Service..................p.8 Thank you for purchasing this American DJ® product. The Q-2221 Is ready to be used, there Is no assembly required.
-
Page 15: Operating Determinations
Operating Determinations When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust! There should not be any cables lying around. Doing so endangers you as well as others. Do not operate the mixer in extremely hot (more than 30°... -
Page 16: Functions (Front Panel)
Functions (Front Panel) (1) POWER SWITCH - Red LED will light when power is ON. (2) MASTER LEVEL - Dual LED's show the level of the left and right master output. (3) GAIN CONTROL - Used to set the level of the input signal for its designated channel. (4) BASS/MID/TREBLE CONTROL - Used to increase or decrease the LOW's, MID’s, and HI’s of the input signal. - Page 17 Functions (Front Panel) Cont. (10) HAMSTER SWITCH - Changes the position of the Feather Fader™ Crossfader (9) (for crabbing). Channel 1 changes to the right side of the fader (mixing from right to left), and Channel 2 changes to the left side of the fader (mixing from left to right).
-
Page 18: Player Control
Inputs and Outputs Rear Panel) Cont. (19) DJ MICROPHONE LEVEL / DJ MIC TREBLE CONTROL / DJ MIC BASS CONTROL - The DJ MIC LEVEL CONTROL adjusts the microphone volume output level. The DJ MIC TREBLE CONTROL and DJ MIC BASS CONTROL under the DJ MICROPHONE are used to adjust treble and bass of the DJ MICROPHONE. -
Page 19: Warranty And Service
Technical Specifications - model Q-2221 Inputs: Line: 75mV, 3k Ohm • Microphone: 2.5mV, 600 Ohm • Phono: 1.5mV, 47k Ohm Output: Line: 25V, peak to peak • Headphones: 5W @ 47 Ohm • Distortion: <0.03% Signal-To-Noise Ratios: Line: Better than 85dB • Microphone: Better than 78dB • Phono: Better than 80dB Frequency Response: Line: 20Hz - 15KHz, ±...