Russound ACT-1 Instruction Manual

SPECIFICATIONS
ACT-1
Current Rating: 10 amps at 120VAC
Circuit Breaker: 10 amp re-settable
12VDC Input Connector: 1/8" male jack,
tip(+), sleeve(-)
Input DC Current: 100mA at 12VDC
Weight: 12.5oz (.4kg)
Dimensions: 3 3/4"W x 2"H x 5"D
(9.5 x 5.1 x 12.7 cm)
NOTICE
ACT-1 Must Mount Vertically.
ACT-1 Doit Monter Verticalement.
ACT-1UK
10 amps at 230VAC
10 amp re-settable
1/8" male jack,
tip(+), sleeve(-)
100mA at 12VDC
12.5oz (.4kg)
3 3/4"W x 2"H x 5"D
(9.5 x 5.1 x 12.7 cm)
LIMITED WARRANTY
The Russound ACT-1 and ACT-1UK are fully guaranteed for Two (2) years from the date of purchase
against all defects in materials and workmanship. During this period Russound will replace any defec-
tive parts and correct any defect in workmanship without charge for either parts or labor. For this
warranty to apply, the unit must be installed and used according to its written instructions. If service is
necessary, it must be performed by Russound. The unit must be returned to Russound at the owner's
expense and with prior written permission. Accidental damage and shipping damage are not consid-
ered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting
from abuse or servicing performed by an agency or person not specifically authorized in writing by
Russound. Damage to or destruction of components due to improper use voids the warranty. In these
cases the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to
Russound at the owner's expense, along with a note explaining the nature of the service required. Be
sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit
from damage in transit.
5 Forbes Rd. Newmarket, NH 03857, USA
603.659.5170 • Fax 603.659.5388
e-mail: tech@russound.com
ACT-1
12 Triggered AC Outlet
VDC
ACT-1
Instruction Manual
ACT-1UK 230
VAC
Come visit us at:
ACT-1UK
ACT-1 120
VAC