Kyocera SC Datasheet

SC Series Pumps
Water Delivery up to 43 gpm /162 lpm,
Pumping Range 0-550 feet / 0-167 meters
Brushless, Permanent Magnet Motor
with Multi-Stage Centrifugal Pump End
Corrosion-Resistant, Permanently
Lubricated and Maintenance Free
The Kyocera SC Series of submersible solar pumps are high quality,
maintenance-free, DC powered pumps designed specifically for
water delivery in remote locations.
They operate on 140 to 1000 watts of direct current at 30 to 120
volts. The power may be supplied from a variety of independent
sources including solar modules and/or batteries.
The motors are state of the art, brushless DC, permanent magnet type
constructed from marine grade bronze and 304 stainless steel. Designed
with a pump motor face, they bolt directly to standard 4.0 inch diameter
submersible pump ends. Internal pressure equalization allows motor
submergence to any depth without damage to seals.
The pump ends are multi-stage centrifugal. They are manufactured by
Goulds Pumps, Inc., constructed from 304 stainless steel and plastics.
The impellers and diffusers are constructed from a rugged thermoplastic
and are extremely resistant to mineral and algae deposits. Field
replacement of the pump end is easily accomplished without the
use of specialized tools.
The SC series pumps can be installed below the water level in a well,
lake, river or cistern.They can be used to fill open tanks or used to
pressurize water systems with heads up to 550 feet (167 meters).
They are designed for use in stand alone water delivery systems.
They are pollution-free, corrosion resistant, permanently
lubricated and quiet.There is no better way to provide water for
livestock, remote homes, campsites, small farms or any other need
beyond the commercial power grid.
Kyocera Solar Water Pumping Systems
and Components are Manufactured by
Kyocera Solar, Inc.