Page 3
Introduction Your TuneBase FM can be used to charge, hold, power, and play your iPod as you drive. This User Manual explains how you can use your TuneBase FM to get the most from your iPod, virtually anywhere you go. iPod Models You Can Use with Your TuneBase FM Your TuneBase FM can be used with the following iPod models: iPod...
Stickers for TuneBaseFM2 cradles BelkinIDG 09/11/02007 ods v.1.2 Stickers for TuneBaseFM2 cradles Setup Instructions BelkinIDG 09/11/02007 ods scale 1:1 v.1.2 Please ensure correct sizing for cradle’s sticker recess Your TuneBase FM for iPod includes seven adapter sleeves and five spacer pads for all supported iPod models.
Page 7
Setup Instructions 2. Carefully slide the sleeve into the top of the cradle and attach the spacer pad to the back of the cradle. Setup Instructions | 05...
Page 8
Setup Instructions 3. Turn down your stereo volume. 4. Connect your TuneBase FM to the cigarette lighter adapter or power outlet in your vehicle. The LED on your TuneBase FM indicates proper connection. Warning: Be careful when rotating the connector in the cigarette lighter adapter or power outlet.
Basic Controls Using Your TuneBase FM Your TuneBase FM will automatically turn on when your iPod is connected and power is available, and it will automatically turn off when your iPod is removed or if power becomes unavailable. Using ClearScan to Find the Best FM Frequency (recommended) Your TuneBase FM uses ClearScan technology to scan for the clearest FM frequencies in your area.
Page 10
1. Tune your stereo to a frequency with a weak signal. If possible, try to find a frequency that is not broadcasting a radio station. To identify the best available frequencies in your area, visit www.belkin.com/mybestfm. 2. Press the + or — button on your TuneBase FM to select the same frequency. Pressing and holding either button will provide faster tuning.
Using the TuneBase FM Using the PRO Setting to Improve Performance When you connect your iPod, your TuneBase FM will automatically adjust the volume for your iPod model. Although the default volume setting will be ideal for most conditions, you may be able to improve the audio performance of your TuneBase FM by using the PRO setting.
Troubleshooting You can quickly solve most problems with your TuneBase FM by following the advice in this section. Your iPod is not charging. Solution • Make sure your TuneBase FM is correctly connected to the power outlet. The green indicator light on your TuneBase FM’s cigarette lighter adapter should be lit at all times.
Page 13
Troubleshooting Your TuneBase FM and iPod are in the way of your vehicle’s controls. Solution • Use the flexible gooseneck and the articulation behind the docking cradle to position your TuneBase FM away from your vehicle’s controls. Try to position the gooseneck in as close to an upright position in relation to the adapter as possible (Fig.
Page 14
Troubleshooting Your TuneBase FM connects firmly to the power outlet, but it still rotates. Solution • Check to see if the power outlet rotates in its socket. If so, please consult your vehicle’s manufacturer. You cannot insert the cigarette lighter adapter into the power outlet. Solution •...
Page 15
Failure to observe this safety warning can result in injury or property damage. Belkin does not assume any responsibility for personal injury or property damage incurred due to hazardous driving as a result of interaction with the TuneBase FM, the iPod, or the vehicle’s power outlet.
(except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.