Denon DP-500M Operating Instructions Manual

Denon DP-500M Operating Instructions Manual

Denon direct drive manual turntable system operating instructions dp-500m
Hide thumbs Also See for DP-500M:

Advertisement

DIRECT DRIVE MANUAL TURNTABLE SYSTEM
DP-500M
OPERATING INSTRUCTIONS
SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE
CABINET FOR FUTURE REFERENCE

Advertisement

Table of Contents
loading

Summary of Contents for Denon DP-500M

  • Page 1: Please Check To Make Sure The Following Items Are Included With The Main Unit In The Carton: Operating Instructions (These Instructions)

    DIRECT DRIVE MANUAL TURNTABLE SYSTEM DP-500M OPERATING INSTRUCTIONS SERIAL NO. PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE...
  • Page 2: Hinge

    Do not open the bottom cover In order to prevent electric shock, do not open the bot- tom cover. If problems occur, contact your DENON dealer. Do not place anything inside Don not place metal objects or spill liquid inside the turntable system.
  • Page 3: Table Of Contents

    Thank you very much for purchasing the DENON direct drive manual turntable system. Please read the operating instructions thoroughly in order to acquaint yourself with the turntable system and achieve max- imum satisfaction from it. TABLE OF CONTENTS FEATURES ...3 1.
  • Page 4: Assembly

    2. ASSEMBLY • Do not plug in the power cord until assembly is com- pleted. (1) Mounting the turntable Motor shaft Remove all the parts in the box. Remove the packaging materials from the main unit and all the parts. •...
  • Page 5: Adjustments

    3. ADJUSTMENTS • Turn the power off when performing adjustments. (1) Stylus pressure and anti-skating adjustment Set the anti-skating knob to "0". Lower the lifter lever, and move the tone arm. • Lift the tone arm from the armrest and move it over the turntable.
  • Page 6: Connections

    4. CONNECTIONS • Be sure to turn off the amplifier's power when making connections. Use the included connecting cords to connect the left(L) and right(R) output terminal (PHONO OUT) to the amplifier's PHONO L and R input terminals. Connect the ground wire (with the output cords) to the amplifier's GND (ground) terminal.
  • Page 7: Troubleshooting

    3. Are the speakers and amplifiers functioning correctly? If the turntable system still does not function properly, check it again, using the check list below. If the symptom does not correspond to the check list, please contact your DENON dealer. Symptons •...
  • Page 8 16-11, YUSHIMA 3-CHOME, BUNKYO-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321 Printed in Taiwan R.O.C. 511 4121 003...

This manual is also suitable for:

500m - dp turntable

Table of Contents