Multi-Screen Function - Pioneer SD-643HD5 Operating Instructions Manual

MULTI-SCREEN FUNCTION

TV CBL VCR DVD
/SAT /LD
TV
/DTV
TV ANT
INPUT
1 2 3
SPLIT SPLIT SEARCH
FREEZE FREEZE
SCREEN
MODE
SWAP SELECT SELECT
DISPLAY
1 2
4 5
7 8
0
¢
CH
RETURN
CH
MUTING
4
NOTES:
• The same image cannot be viewed as both the main
picture and the sub-picture.
• Pressing the MENU button in SPLIT or FREEZE
screen mode restores the screen display to normal
and displays the menu on screen.
• These functions cannot be used when INPUT 1 or
INPUT 2 is receiving a 1080i or 480p component
signal (or the signals might not be received or noise
might be generated).
• When a TV broadcast is being received, the screen
on the right will not show the antenna B signal.
If antenna B is displayed on the left screen during
SPLIT screen, the SWAP operation cannot be done.
• RGB signals input from INPUT3 cannot be
displayed.
• Continuous operation for extended periods in SPLIT
or FREEZE screen mode may burn out the screen.
We thus recommend that these modes only be used
in conjunction with the normal screen mode.
• If the non-interlace signal for a TV game etc. is
entered to the left screen during SPLIT screen
mode, the right screen may be disrupted. If this
occurs, use the right screen for TV game etc. entry.
VIEWING TWO SCREENS (SPLIT screen)
The screen can be split vertically, making it possible to view different images
on the left and right.
4
Press the SPLIT button.
SUB CH SUB CH
SLEEP
3
6
9
CH
ENTER
VOL
MAKING NOTES ON PROGRAM
CONTENT (FREEZE screen)
The screen can be frozen, such as for taking down a recipe from a cooking
program or an address for entering a quiz, or the like.
Press the FREEZE button.
The screen on left side is the main picture, and the other screen is the
sub-picture. Sound will be output for the main picture.
Sound from the TV speaker will only be output for the main picture.
To listen to sound for a sub picture, press the SWAP button and switch
the screens on the left and the right.
Regular operations can be performed on the main picture.
A N T . A 3 6
SPLIT
When the SUB CH +, – buttons are pressed, the channel for the sub-
picture will be changed.
When the SELECT button is pressed, the \ will move to the other
screen.
The MONITOR OUTPUT terminal outputs the main picture signal.
Pressing the SPLIT button again will restore the original screen.
FREEZE
Moving screen
This function is operable only with the normal screen.
Pressing the FREEZE button again will restore the original screen.
A N T . A 3 6 A N T . A 2 5
(Main picture) (Sub picture)
Moving screen Still screen
41