Pioneer SD-643HD5 Operating Instructions Manual page 16

CONNECTING VIDEO/AUDIO EQUIPMENT
Front panel
INPUT 4
INPUT jacks
There are 4 sets of inputs for VCR and DVD/LD players. Use
RCA-type pin plug cords (the same as those used in Hi-Fi
systems) for connections. When the audio source to be
connected is mono, connect the source to the L-(MONO) jack.
MONITOR OUTPUT jacks
These are used for connecting the monitor to a VCR for
recording, or for linking it to another monitor. These jacks output
the video and audio signals of the source currently selected
by the INPUT selector. Connect these output jacks to your VCR's
inputs. Connect the VCR's outputs to the monitor's VIDEO
inputs.
S-VIDEO INPUT jacks
• Inputs signals from a DVD/LD player that has an S-VIDEO
output jack.
• When the signal input from the S-VIDEO INPUT jack is output
from the MONITOR OUTPUT jack, the output signal will be
a composite of Y and C.
16
S - VIDEO
AUDIO
VIDEO L R
( MONO )
R L VIDEO S-VIDEO
OUTPUT
COMPONENT VIDEO INPUT jack
Inputs three signals – Y, P
players and the like.
Input formats in which images can be received.
Format
DVD player, etc. 480 i
1080 i
Digital tuner, etc.
480 p
RGB INPUT jack
Inputs five signals – R, G, B, H and V – output from digital
tuners and the like.
Input format in which images can be received.
Format
Digital tuner 1080 i
NOTES:
• SPLIT screen, FREEZE screen and SEARCH screen functions
cannot be used when 1080i or 480p component signals are input.
• Signals from MONITOR OUTPUT jacks will not be output when
component signals or RGB signals are input.
• The RGB input jack is designed for use in connecting a digital
tuner with RGB signal output, and it should accordingly never
be used for connecting to a personal computer or other device.
Video movie/VCR
(C ) and P (C ) – output from DVD
B B R R
Horizontal Vertical
frequency frequency
15.734 kHz 60 Hz
33.75 kHz 60 Hz
31.468 kHz 60 Hz
Horizontal Vertical
frequency frequency
33.75 kHz 60 Hz