Listening To The Radio; Auto Preset Memory; Auto Tuning; Manual Tuning - Denon DRA-37 Operating Instructions Manual

Operation

Listening to the radio

Check that the remote control unit is set to "A".

Auto preset memory

This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
1 < ON/STANDBY >
Press and set the DRA-37's power
to the standby mode.
2 < PRESET • > < ON/STANDBY >
Hold and press
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is
completed.
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the station,
then preset it using the manual "Preset memory" operation.
• To interrupt this function, press < ON/STANDBY > .
¢ Default settings
Auto tuner presets
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
A1 ~ A8
90.1 MHz
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
B1 ~ B8
90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz

Auto tuning

1 < INPUT SELECTOR >
Use
[TUNER]
.
2
BAND
Press to select "AM" or "FM".
When listening to the XM Satellite Radio (
3
MODE
Press to set the auto tuning mode.
• The "AUTO" indicator lights.
.
4
TUNING
Press .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
• "AM" or "FM" can be selected directly by pressing [FM/AM].

Manual tuning

< INPUT SELECTOR >
1
Use
[TUNER]
.
2
BAND
Press to select "AM" or "FM".
When listening to the XM Satellite Radio (
3
MODE
Press to set the manual tuning mode.
Check that the display's "AUTO" indicator turns off.
4 TUNING
Press .
The frequency changes continuously when the button is held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
• "AM" or "FM" can be selected directly by pressing [FM/AM].
12
ENGLISH

Preset memory

to select "TUNER" or press 1
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
2
Press
page 13).
3
Press
the desired memory block (A to G).
4
Press
preset channel (1 to 8).
5
Press
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 4.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
to select "TUNER" or press

Recalling preset stations

1
Press
the memory block.
page 13).
2
Press
preset channel.
MEMORY
.
[MEMORY BLOCK] A G SHIFT
( to ) or
< PRESET >
[CHANNEL]
or to select the desired
MEMORY
again.
[MEMORY BLOCK] A G SHIFT
( to ) or
< PRESET >
[CHANNEL]
or to select the desired
ENGLISH
Operation
to select
to select