Setting Default Scan Options - Lexmark Dot Matrix User Manual

To
Specify a color to remove
Select a color dropout quality
Produce a mirror image of the
document
Notes:
•
You can also type scanimage --help to get a list of supported options.
•
Your printer may not support all these options. To check, see the printer User's Guide.

Setting default scan options

All default scan options are stored in the scan driver configuration file, /etc/sane.d/lexmark_nscan.conf. Changing the
values in the scan driver configuration file changes the default settings. The settings are reflected in the application.
XSane stores the most recently used scan settings in the ${HOME}/.sane/xsane directory. In order for XSane to reflect
the changes you made in the scan driver configuration file, do the following:
1
Close XSane the application.
2
Open a terminal window, and then type rm -f ${HOME}/.sane/xsane/*.drc. Press Enter
3
Type xsane. Press Enter
Type
color-dropout
color-dropout-threshold
mirror-image
Scanning
17
Values
None
Red
Green
Blue
0–254
no
yes