Getting Started; Package Checklist - Honeywell HW1000i - Portable Inverter Generator Owner's Manual

Inverter generator
Hide thumbs Also See for HW1000i - Portable Inverter Generator:
Table of Contents

Advertisement

Available languages

Available languages

GETTING STARTED

Use the information in this section to prepare your generator for operation.
ANYONE using this generator must read, understand, and follow all safety and operation instructions provided in the
product manual. Failure to closely follow these instructions can result in circumstances leading to death, serious injury,
and property damage.

Package Checklist

Generator is heavy! Obtain assistance to lift the generator to avoid back or other bodily injury.
1.
Set carton on a rigid, flat surface.
Remove carton contents.
2.
3.
Remove and discard silica gel pack.
Verify all of the following items are included in the generator package:
4.
Inverter Generator
Owner's Manual
Oil Fill Container
Tool Kit
‰ Oil Drain Pipe
‰ Spark Plug Wrench
‰ Screwdriver Handle
‰ Screwdriver Universal Bit
5.
Inspect for damage.
Carefully inspect generator for any damage that may have occurred during shipment. If loss or damage is noted after
opening, separate damaged materials and call 1-888-HWHELP1 (494-3571).
6.
Remove the "No OIl Fill" tag from the generator. See "Adding Engine Oil" on page 18.
CAUTION!
OIL HAS BEEN DRAINED FOR SHIPPING
Failure to fill engine with oil before starting
engine will result in permanent damage
and will void engine warranty.
FUEL ODORS MAY ALSO BE PRESENT
DUE TO FACTORY TESTING
(Please remove tag prior to operating)
p/n 102415A
Record generator information.
7.
Write down the identification information specific to your generator in the spaces provided on the inside cover of this
Owner's Manual. This information is located on the generator nameplate (see illustration below).
FIGURE 4: Generator Nameplate Location
HW1000i / HW2000i Inverter Generator Owner's Manual
p/n XXXXXXX
Northshore Power Systems, LLC
Milwaukee, WI 53212 USA
245453
Power Output:
0.9kW
Model Number:
HW1000i
Frequency:
60Hz
AC Voltage:
120V
Engine RPM:
5400
Duty Cycle:
Continuous
Fuel:
Gasoline
o
Max. Ambient Temp.: 40
C
Insulation Class: F
Serial Number:
GROUNDED SYSTEM
www.honeywellgenerators.com
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hw2000i

Table of Contents