Yaesu FT-950 Operating Manual page 87

C M
ONTEST
T M P
EXT ESSAGE ROGRAMMING
1. Press the [ CW ] button to set the operating mode to
CW.
2. Be sure that Break-in is "Off" by pressing the [ BK-IN ]
button, if necessary.
3. Press the FH-2 [ MEM ] key. A blinking "
will appear in the display.
4. Press an FH-2 [ 1 ] ~ [ 5 ] key to select the desired CW
Memory Register into which you wish to program the
text, the blinking "
FT-950 O
PERATING
CW C
K
EYER ( U
EMORY
SING THE OPTIONAL
" icon
LOCK
ON OFF
" icon will be disappeared.
LOCK
ON OFF
M
ANUAL
ONVENIENCE
FH-2 R
EMOTE
5. Use the FH-2's [ ] and [ ] keys to set the cursor
position and use the FH-2's [ ] and [ ] keys to choose
the letter/number to be programmed in each slot of the
memory. In the case of the second example above, the
"#" character designates the slot where the Contest
Number will appear.
A :
DVICE
You may also use the Main Tuning Dial knob and the
[ CLAR/VFO-B ] knobs to program the message char-
acters.
6. When the message is complete, add the "}" character
at the end to signify the termination of the message.
7. Press and hold in the FH-2's [ MEM ] key for one sec-
ond to exit, once all characters (including "}") have
been programmed.
Deleting Previously-stored Characters
Use the FH-2's [ ] and [ ] keys or Main Tuning
Dial knob to select the last correct letter in the
message. Now use the FH-2's [ ] and [ ] keys
or rotate the [ CLAR/VFO-B ] knob to select the
"}" character; everything after the "}" character will
be deleted.
F
EATURES
)
C K
ONTROL EYPAD
LOCK
ON OFF
Message Cursor
CW Memory Register Number
LOCK
ON OFF
Page 85