Installation Of The Optional Filter; Voice Memory Unit (Dvs-6) - Yaesu FT-950 Operating Manual

I
NSTALLATION OF
The DVS-6 Voice Memory Unit provides five memories capable of storing up to 20 seconds each of voice audio. You can
store and then repeatedly transmit short identification and information messages.
Installation
1. Turn the FT-950's [ POWER ] switch "off", and turn
off the external DC power supply.
2. Disconnect all the cables from the FT-950.
3. Referring to Figure 1, remove the 18 screws attaching
the bottom case, then remove the bottom case.
4. Refer to Figure 2 for the mounting location for the
DVS-6.
5. Refer to Figure 3, push the DVS-6 onto the pins corre-
sponding to its assigned mounting location on the trans-
ceiver. Gently press the board down until it is firmly
seated in its connectors.
6. Replace the bottom case and its 18 screws.
7. Connect the antenna and DC power supply to the FT-
950.
Operation
Please see page 64 of this Operating Manual.
Page 120
O
PTIONAL
V M U
OICE EMORY
A
CCESSORIES
( DVS-6 )
NIT
F
IGURE
J1016 (5-pin)
F
IGURE
F
IGURE
FT-950 O
1
J1015 (6-pin)
2
DVS-6
3
M
PERATING ANUAL