Specifications - Yaesu FT-270R Operating Manual

Frequency Ranges:
Channel Steps:
Frequency Stability:
Repeater Shift:
Emission Type:
Antenna Impedance:
Supply Voltage:
(Negative Ground)
Current Consumption:
(Approx. @7.2 V)
Operating Temperature: –4º to 140º F (–20 °C to +60 °C)
Case Size:
Weight:
RF Power Output:
Modulation Type:
Maximum Deviation:
Spurious Emission:
Microphone Impedance: 2 kΩ
Circuit Type:
Intermediate Frequencies: 1st: 21.7 MHz
Sensitivity:
Selectivity:
AF Output:
(@ 7.5 V)
Specifications are subject to change without notice, and are guaranteed within the 144
MHz amateur band only. Frequency ranges and functions will vary according to trans-
ceiver version; check with your dealer.
FT-270R O
RX 137 - 174 MHz
TX 144 - 146 (148) MHz
5/10/12.5/15/20/25/50/100 kHz
±5 ppm @ 14º to 140º F (–10° to +60° C)
±600 kHz
F2D , F3E
50 Ω
Nominal: 7.2 V DC
Operating: 6.0 ~ 16.0 V DC (EXT DC Jack)
11.0 ~ 16.0 V DC (EXT DC Jack with Charging)
165 mA (Receive, 200 mW output)
45 mA (Standby, Saver Off)
20.5 mA (Standby, Saver On)
8 mA (Auto Power Off)
1.5 A (5 W TX)
2.36" (W) x 4.72" (H) x 1.26" (D) (60 x 120 x 32 mm)
(W/O knob, antenna, & belt clip)
13.8 Oz (390 g) with FNB-83, antenna, and belt clip
5.0 W (High) / 2.0 W (Middle) / 0.5 W (Low) (@7.2 V)
Variable Reactance F2D, F3E
±5.0 kHz (F2D, F3E)
At least 60 dB down (@ High and Middle power)
At least 40 dB down (@ Low power)
Double-Conversion Superheterodyne
2nd: 450 kHz
0.2 µV for 12 dB SINAD (137-140 MHz)
0.16 µV for 12 dB SINAD (140-150 MHz)
0.2 µV for 12 dB SINAD (150-174 MHz)
12 kHz/35 kHz (–6 dB /–60 dB)
800 mW @ 16 Ω for 10 % THD (Internal Speaker)
400 mW @ 8 Ω for 10 % THD (EXT SP Jack)
M
S
PECIFICATIONS
81