Digital Noise Reduction (Dnr) Operation; Digital Notch Filter (Dnf) Operation - Yaesu FT-2000 Operating Manual

D
The Digital Noise Reduction (DNR) system is designed to reduce the level of random noise found on the HF and 50 MHz
bands, and it is especially effective during SSB operation. By rotating the [ DNR ] knob, any of sixteen different noise-
reduction algorithms can be selected; each of these algorithms was created for dealing with a different noise profile, and
you will want to experiment with the DNR system to find the best setting according to the noise currently being experi-
enced.
1. Press the [ DNR ] button. The "
in the display, confirming that the DNR system is en-
gaged.
2. Rotate the [ DNR ] knob to select the setting that most
effectively reduces the noise level.
3. To disable the DNR system, press the [ DNR ] button
once more. The " " icon will turn off, confirming
that the DNR system is not active.
A :
The Digital Noise Reduction affects the Main band (VFO-
A) only.
The Digital Notch Filter (DNF) is an effective beat-cancelling filter that can null out a number of interfering beat notes
inside the receiver passband. Because this is an Auto-Notch feature, there is no adjustment knob associated with this filter.
A :
If a very strong interfering carrier is encountered, we recommend you first use the IF Notch filter, as it is the most effective
notching tool in the receiver section.
1. Press the [ DNF ] button. The "
appear in the display, confirming that the DNF
system is engaged.
2. To cancel DNF operation, press the [ DNF ] button once
more. The " " icon will turn off, confirming that
the Digital Notch Filter is no longer in operation.
A :
The Digital Notch Filter affects the Main (VFO-A) band
only.
FT-2000D O
I
NTERFERENCE
N R
IGITAL OISE EDUCTION
" icon will appear
D N F
IGITAL OTCH
" icon will
M
R
EJECTION ( S
DNR O
DNF O
ILTER PERATION
IGNALS WITHIN
PERATION
NOTCH Indicator
)
3
KHZ
[ DNR ] Knob
[ DNR ] Button
[ DNF ] Button
Page 59