Memory Operation; Convenient Memory Functions - Yaesu FT-2000 Operating Manual

M O
EMORY
The FT-2000D contains ninety-nine regular memories, labeled "01" through "99," nine special programmed limit memory
pairs, labeled "P-1L/1U" through "P-9L/9U," and five QMB (Quick Memory Bank) memories, labeled "C-1" through
"C-5." Each stores various settings, not only the Main band's (VFO-A) frequency and mode (See below). By default, the 99
regular memories are contained in one group; however, they can be arranged in up to six separate groups, if desired.
Q P :
The FT-2000D's memory channels store the following data (not just the operating frequency):
Frequency
Mode
Clarifier status and its Offset Frequency
ANT status
ATT status
IPO status
VRF status
Roofing filter status and its Bandwidth
Noise Blanker status
CONTOUR status and its Peak Frequency
DSP Noise Reduction (DNR) status and its Reduction algorithm selection.
DSP Notch filter (NOTCH) status
NAR bandwidth status
DSP Auto Notch filter (DNF) status
Repeater Shift Direction and Shift Frequency
CTCSS status and Tone Frequency
R M C
98
97
03
02
01
Page 98
PERATION
C
ONVENIENT
PMS M C
99
P-7L/7U
P-6L/6U
P-5L/5U
P-4L/4U
P-3L/3U
P-2L/2U
P-1L/1U
QMB M C
M
EMORY FUNCTIONS
P-9L/9U
P-8L/8U
FT-2000D O M