Advertisement
IMPORTANT
For service, spares or any advice in
the UK, please contact Electrolux
Customer Care on 08706 055 055.
Steam Gun
Owner's Guide
Enviro Steamer
350 Series
INDEX
Important Safeguards ................... 2
Service Information ...................... 3
Use & Assembly ........................ 5-8
Maintenance ................................. 9
Problem Solving ......................... 10
Guarantee .................................. 11
Household Type
Advertisement
Related Manuals for Electrolux 350 STEAM GUN
Summary of Contents for Electrolux 350 STEAM GUN
-
Page 1: Table Of Contents
Important Safeguards ....2 Service Information ...... 3 For service, spares or any advice in Use & Assembly ......5-8 the UK, please contact Electrolux Maintenance ......... 9 Customer Care on 08706 055 055. Problem Solving ......10 Guarantee ........11... -
Page 2: Important Safeguards
• Do not use the appliance if it is damaged. Any repair work, including the replacement of the power cord, must only be carried out by Electrolux Service Agent or by Electrolux authorized technicians - as a special tool is required - in order to prevent any risk. -
Page 3: General Information
Service Information The instructions in this booklet serve as a guide to routine maintenance. For additional service information, please telephone Electrolux Customer Care on 08706 055055 (for UK residents only). You should know the model and type when you call. - Page 4 30 minutes before attempting to use the cleaner. After the 30 minute period, plug the cleaner back in and turn on the switch. If the cleaner still does not heat up, please call Electrolux on 08706 055055 if you reside in the UK.
-
Page 5: Use & Assembly
Description of the Enviro Steamer Steam Gun 1. Appliance body 2. Articulated steam nozzle 3. Safety cap 4. Steam push button 5. Handle 6. Steam-dispenser safety button 7. Warning light 8. Power cord 9. Cord base ACCESSORIES 10. Funnel 11. Measure 12. - Page 6 How to start the appliance Before switching on the appliance, unwind the power cord (8) from its hook, removing the base (9) by turning it clockwise (Fig. B). It is not necessary to refit the base (9) before using the appliance. Plug the appliance into a mains socket;...
- Page 7 Round brush and bent nozzle: Both these attachments can be applied to the straight nozzle (Figure D and D/1) and the articulated nozzle (Figure E and F). Apply them to the hexagonal end and then choose the desired angle. Fig. D Fig.
- Page 8 Suggested Uses for Attachments Scrub Brush Stovetops, work surfaces, sealed grout, inside rubbish bins. Fabric Tool Steaming clothes, upholstery, curtains. It is suggested that the additional cloth is used with the fabric tool when used on clothing, upholstery and curtains. Window Cleaner Windows, mirrors, glass doors.
-
Page 9: Maintenance
CLEANING AND MAINTENANCE Unplug the appliance from the outlet before carrying out any operation. Let the appliance cool down completely before putting it away or cleaning it. Refit the cord base (9) to the bottom section of the appliance, inserting the reference tabs into the relevant openings and turning it anticlockwise. -
Page 10: Problem Solving
Review this guide for assembly instructions. Assembly or related General questions For service, spares or any accessories advise in the UK, please contact Electrolux Customer Care on 08706 055055. Please have the model and type numbers ready when you call. -
Page 11: Guarantee
The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.