Sign in today to find solutions:

Don't have an account? Sign up

 

Summary of Contents

  • Page 2: Table Of Contents

    WALRB3P manual booklet 5/2/06 3:13 PM Page 2 TABLE OF CONTENTS Introduction ..............3 Features And Functions .

  • Page 3: Features And Functions

    INTRODUCTION FEATURES AND FUNCTIONS The One For All 3 Device Universal Remote Control (URC-3220) is designed Use the illustration below to locate features on the One For All 3 Device to remotely operate up to three home entertainment devices. It also...

  • Page 4: Programming Device Control

    NOTE: Please refer to the table below when performing the instructions in “Programming numbers on some TVs. Device Control”on page 8. After programming, the One For All 3 Device Universal Remote Control will Use GUIDE to display your selected device’s be able to control the following types of devices: program guide or setup menu.

  • Page 5: Installing Batteries, Manufacturer's Codes

    INSTALLING BATTERIES PROGRAMMING DEVICE CONTROL The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the fol- lowing steps;...

  • Page 6: Programming A Master Power Macro, Programming The Power Key For The Master Power Macro

    WALRB3P manual booklet 5/2/06 3:13 PM Page 9 SEARCHING FOR YOUR CODE Repeat step 4 (on the previous page) three more times for remaining digits. Use for the second digit, for the third If your device does not respond to the remote control after trying all codes digit, and for the fourth digit.Write down the code dig- listed for your brand, or if your brand is not listed at all, try searching for...

  • Page 7: Clearing The Master Power Macro, Re-assigning Device Keys, Using Channel Scan

    . The will blink twice. RE-ASSIGNING DEVICE KEYS The One For All 3 Device Universal Remote Control can be set to control a DVD player and a VCR (or a PVR) or a second DVD player by re-assigning the unused...

  • Page 8: Restoring Factory Default Settings, Unlocking Volume Control For A Single Device

    Press and and hold until the (red light) blinks twice, The One For All 3 Device Universal Remote Control also contains a Factory then release Reset program that you can use to reset all custom settings and setup codes Enter and then press once.

  • Page 9: Troubleshooting, Instructions To The User, Lifetime Warranty

    WALRB3P manual booklet 5/2/06 3:13 PM Page 15 TROUBLESHOOTING LIFETIME WARRANTY PROBLEM: (red light) does not blink when you press a key. One For ALL ("OFA") warrants this product to be free from defects in materials and workmanship, under normal use, throughout the period of the product’s SOLUTION: Replace batteries with two new AAA alkaline batteries.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: