Setting.channel.modulation - Uniden BC125AT Owner's Manual

• CTCSS/DCS Search - the scanner displays any tone/
code being used, but opens squelch on any signal.
• No Tone - indicates that the channel squelch will only
open if no CTCSS/DCS is detected.
• <Back - returns to Channel Menu.
Note: If you select Off, CTCSS/DCS Search, or No Tone,
the scanner returns to the channel menu. If you selected
CTCSS or DCS, you can then select the CTCSS tone or
DCS code.
Scroll to select, then press Pgm/E to save and return to the
5.
Channel menu.

setting.channeL.ModuLation

To select a channel, press Hold and then enter the channel
1.
number.
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Scroll to select Set Modulation and press Pgm/E.
3.
4. Scroll to select modulation from the following options
(Default = Auto):
• Auto - the scanner selects the modulation automatically
based on the frequency's band.
• AM - the scanner uses AM modulation.
• NFM - the scanner uses Narrowband FM modulation.
• FM - the scanner uses FM modulation.
Press Pgm/E to save and return to the Channel menu.
5.
41