Precautions; Troubleshooting - Honeywell RCW33W - Atomic Wall Clock User Manual

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled
carefully. Here are a few precautions:
• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive materials. They may
scratch the plastic parts and corrode the electronic circuits.
• Do not subject the product to excessive force, shock, dust, temperature,
or humidity, which may result in malfunctions, shorter lifespan,
damaged batteries, and damaged parts.
• Do not tamper with the units internal components. Doing so will
invalidate the warranty and may cause damage. These units contain no
user-serviceable parts.
• Use only fresh batteries. Do not mix new and old batteries.
• Read the user's manual thoroughly before operating the units.
15

TROUBLESHOOTING

Check here before contacting customer service.
Issue Symptom
Main unit US Atomic Time
signal is not received
Remote sensor Cannot locate remote
sensor
Cannot change the
C° to F° and back
Data does not match
data on the main unit
15
Solution
Place unit by the window and
keep it there overnight
Check batteries
Check location
Press and hold DOWN ( ▼)
button on the main unit to search
for the signal form the remote
sensor
Press "RESET" after setting C/F
Initiate manual sensor search
(Press and hold DOWN ( ▼)
button on the main unit)
16