D-Link DIR-600 - Wireless N 150 Home Router User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-600
  6. User manual

D-Link DIR-600 - Wireless N 150 Home Router User Manual

150mbps wireless router
Hide thumbs Also See for DIR-600 - Wireless N 150 Home Router:
Table of Contents

Advertisement

Quick Links

See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-600 - Wireless N 150 Home Router

Summary of Contents for D-Link DIR-600 - Wireless N 150 Home Router

  • Page 2: Table Of Contents

    Dynamic ............20 Device Info ............49 PPPoE ............21 Log ..............50 PPTP ............22 Statistics ............51 L2TP ............. 23 Active Session ..........51 Dual Access (for Russia only) ...... 24 Wireless Setup ..........25 D-Link DIR-600 User Manual...
  • Page 3 Changing the Computer Name and Joining a Workgroup ..............67 Configuring the IP Address in Vista ......69 Setting Up a Connection or Network Wirelessly ..72 Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) ........... 77 D-Link DIR-600 User Manual...

  • Page 4: Package Contents

    Section 1 - Product Overview Package Contents • D-Link DIR-600 Wireless Router • Power Adapter • Ethernet Cable • Manual and Warranty on CD Note: Using a power supply with a different voltage rating than the one included with the DIR-600 will cause damage and void the warranty for this product.

  • Page 5: Features

    * Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-600 User Manual...

  • Page 6: Hardware Overview

    Receptor for the Power Adapter. The Auto MDI/MDIX WAN LAN Ports port is the connection for Connect Ethernet devices such as the Ethernet cable to the computers, switches, and hubs. Cable or DSL modem. D-Link DIR-600 User Manual...

  • Page 7: Leds

    Power LED Local Network LEDs A solid light indicates a proper A solid light indicates a connection to an connection to the power supply. Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. D-Link DIR-600 User Manual...

  • Page 8: Installation

    If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-600 User Manual...

  • Page 9: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 10: Wall Mounting Your Device

    A. Screw the provided screws with the equipment to the wall or partition where the device to be placed. B. Place the mounting holes on the bottom of the device over the screws to mount it to the wall or partition. C. Connect your cables to the device. Step A Step B Step C D-Link DIR-600 User Manual...

  • Page 11: Connect To Cable/Dsl/Satellite Modem

    8. Verify the link lights on the router. The power light, WAN light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 16 to configure your router. D-Link DIR-600 User Manual...

  • Page 12: Connect To Another Router

    Section 2 - Installation Connect to Another Router If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: •...
  • Page 13 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the WAN port of the D-Link router. 8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router.

  • Page 14: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).

  • Page 15: Setup Wizard

    Internet Setup window to quickly set up your router. Click Internet Connection Setup Wizard, you will be directed to the first window of the wizard. Click Next to continue. Create a new password and then click Next to continue. D-Link DIR-600 User Manual...
  • Page 16 Clone Your PC’s MAC Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. D-Link DIR-600 User Manual...
  • Page 17 If you selected PPTP, enter your PPTP username and password. Click Next to continue. If you selected L2TP, enter your L2TP username and password. Click Next to continue. D-Link DIR-600 User Manual...
  • Page 18 If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Please allow 1-2 minutes for rebooting. When the router has finished rebooting, the opening window will be displayed. D-Link DIR-600 User Manual...

  • Page 19: Static (Assigned By Isp)

    Enter the Primary DNS server IP address assigned by your Address: ISP. Secondary DNS This is optional. Address: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. D-Link DIR-600 User Manual...

  • Page 20: Internet Setup

    Primary / Enter the DNS (Domain Name Server) server IP address Secondary assigned by your ISP. Addresses: MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. D-Link DIR-600 User Manual...

  • Page 21: Pppoe

    Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connection Select either Always-on, Manual, or Connect-on demand. Mode Select: D-Link DIR-600 User Manual...

  • Page 22: Pptp

    Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-600 User Manual...

  • Page 23: L2Tp

    To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-600 User Manual...

  • Page 24: Dual Access (For Russia Only)

    (as previously described for PPTP connections). In addition, the second step also includes an option to use a MAC address that will always be associated with the connection. The MAC address is entered manually or copied from the computer. D-Link DIR-600 User Manual...

  • Page 25: Wireless Setup

    Click Next to continue. Enter a Wireless Network Name in the textbox, which is also know as the SSID and select the desired level of wireless security, WEP, WPA. and then click Next to continue. D-Link DIR-600 User Manual...
  • Page 26 Please print this out or record this information in a safe place and then click Save to continue. The Router will save your new settings and reboot. When it is finished after 1-2 minutes, the opening Wireless Setup window is displayed. D-Link DIR-600 User Manual...
  • Page 27 Enable Hidden checked, the SSID of the DIR-600 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID Wireless: of your DIR-600 in order to connect to it. D-Link DIR-600 User Manual...
  • Page 28 WEP key as you Router before your wireless network adapters. Please establish did on the Router. wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. D-Link DIR-600 User Manual...
  • Page 29 WPA/ WPA2 (whichever of the three options you have selected above) on your adapter and enter the same network key as you did on the router. D-Link DIR-600 User Manual...
  • Page 30 RADIUS server. 1812 is the default port. 6. Next to Shared Secret, enter the security key. 7. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 8. Click Save Settings to save your settings. D-Link DIR-600 User Manual...

  • Page 31: Lan Setup

    Check the box to transfer the DNS server Relay: information from your ISP to your computers. If unchecked, your computers will use the router for a DNS server. Refer to the next page for DHCP information. D-Link DIR-600 User Manual...

  • Page 32: Dhcp Server Settings

    Uncheck to disable this function. DHCP IP Enter the starting and ending IP addresses for Address Range: the DHCP server’s IP assignment. DHCP Lease The length of time for the IP address lease. Time: Enter the Lease time in minutes. D-Link DIR-600 User Manual...

  • Page 33: Time And Date

    Saving: settings to copy your PC’s time settings. Tick the “Automatically synchronize with Server D-Link’s Internet time server” checkbox and Used: then use the drop-down menu to select an NTP Server. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers.

  • Page 34: Parental Control

    The schedule of time when the parental control filter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-600 User Manual...

  • Page 35: Port Forwarding

    Start Port/ Enter the port or ports that you want to open. If End Port: you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Any D-Link DIR-600 User Manual...

  • Page 36: Application Rules

    You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Select TCP, UDP, or Any. Traffic Type: D-Link DIR-600 User Manual...

  • Page 37: Qos Engine

    Network causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. Detected xDSL: When Connection Type is set to automatic, the automatically detected connection type is displayed here. D-Link DIR-600 User Manual...

  • Page 38: Access Control

    The schedule of time when the network filter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-600 User Manual...

  • Page 39: Firewall & Dmz

    See Maintenance>Schedules for more information. IP Address: Enter a beginning and ending IP address. Protocol: Select the transport protocol that will be used for the filter rule. Port Range: Enter the desired port range for the filter rule. D-Link DIR-600 User Manual...

  • Page 40: Advanced Wireless

    Select if you are not using any 802.11n wireless clients. This is the default setting. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. D-Link DIR-600 User Manual...

  • Page 41: Advanced Network

    WAN port to be “Pinged”. You may set the port speed of the WAN port to WAN Port 10Mbps, 100Mbps, or 10/100Mbps Auto. Some Speed: older cable or DSL modems may require you to set the port speed to 10Mbps. D-Link DIR-600 User Manual...

  • Page 42: Routing

    The IP address of the packets that will take this route. Subnet Mask: The subnet of the IP address of the packets that will take this route. Gateway: Specifies the next hop to be taken if this route is used. D-Link DIR-600 User Manual...

  • Page 43: Device Administration

    Port: The port number used to access the DIR-600. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the DIR-600 and 8080 is the port used for the Web-Management interface. D-Link DIR-600 User Manual...

  • Page 44: Save And Restore

    If you want to save the current router configuration settings, use the Save button above. Reboots: Click the Reboots button on the left side of the window to restart the Router. D-Link DIR-600 User Manual...

  • Page 45: Firmware Update

    You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.

  • Page 46: Ddns Setting

    Dyn.Dns.org(free), and Dyn.Dns. org(Static). Host Name: Enter the host name of the DDNS server. Username: Enter the username given to you by your DDNS server. Password: Enter the password or key given to you by your DDNS server. D-Link DIR-600 User Manual...

  • Page 47: System Check

    Ping Test: The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. D-Link DIR-600 User Manual...

  • Page 48: Schedules

    Tick this check box if the new schedule rule applies to the full 24-hour period. Start Time/ If the new schedule rule does not apply to the full End Time: 24-hour period, untick the previous checkbox and then enter a specific beginning and ending time. D-Link DIR-600 User Manual...

  • Page 49: Log Settings

    Click the checkbox(es) of the type of log information Level: requested: “System, Firewall & Security, Router Status, Critical, Warning and Information” Send by Mail: Enter the your SNTP server name(or IP address) and enter your mail address before sending your system log by mail. D-Link DIR-600 User Manual...

  • Page 50: Device Info

    IP settings for the router. WAN: Displays the MAC address and the public IP settings for the router. Wireless Displays the wireless MAC address and your 802.11N: wireless settings such as SSID, Channel, and Encryption status. D-Link DIR-600 User Manual...

  • Page 51: Log

    View the last page of the log. Previous: View the previous page. Next: View the next page. Clear: Clear the log. Link to Log Click this button to go directly to the Log Settings Settings: window (Maintenance > Log Settings). D-Link DIR-600 User Manual...

  • Page 52: Statistics

    WAN and the LAN ports. The traffic counter will reset if the device is rebooted. Active Session The NAPT Active Session table displays a list of all active conversations between WAN computers and LAN computers. D-Link DIR-600 User Manual...

  • Page 53: Wireless

    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client. D-Link DIR-600 User Manual...

  • Page 54: Help

    Section 3 - Configuration Help Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-600 User Manual...

  • Page 55: Wireless Security

    ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. D-Link DIR-600 User Manual...

  • Page 56: Configure Wep

    6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DIR-600 User Manual...

  • Page 57: What Is Wpa

    WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-600 User Manual...

  • Page 58: Configure Wpa/Wpa2-Psk

    6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-600 User Manual...
  • Page 59 RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 9. Click Save Settings to save your settings. D-Link DIR-600 User Manual...

  • Page 60: Connect To A Wireless Network

    Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-600 User Manual...

  • Page 61: Configure Wep

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-600 User Manual...
  • Page 62 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DIR-600 User Manual...

  • Page 63: Configure Wpa-Psk

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-600 User Manual...
  • Page 64 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-600 User Manual...

  • Page 65: Setting Up Wi-Fi Protection

    Wireless Network window or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured Router. D-Link DIR-600 User Manual...

  • Page 66: Setting Up A Configured Router

    Wi-Fi protected network. If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use the push button method or to manually enter the PIN. Follow the on-screen instructions. D-Link DIR-600 User Manual...

  • Page 67: Changing The Computer Name And Joining A Workgroup

    Section 7 - Changing the Computer Name and Joining a Workgroup Changing the Computer Name and Joining a Workgroup The following are step-by-step directions to change the computer name and join a workgroup. 1. Click on Properties. 2. Click on the Advanced system settings link. D-Link DIR-600 User Manual...
  • Page 68 When you are finished, click the Change button. 4. Go to the Computer Name/Domain Changes window and click the radio button next to the Workgroup you want to join. When you are finished, click the OK button. D-Link DIR-600 User Manual...

  • Page 69: Configuring The Ip Address In Vista

    The following are step-by-step directions to configure the IP address in Windows Vista. 1. Click on Properties. 2. Go to the Network and Internet window and click the appropriate Local Area Connection icon. 3. Right-click the Local Area Connection icon and then select Properties from the drop-down menu. D-Link DIR-600 User Manual...
  • Page 70 Local Area Connections Properties window and enter the desired IP address in the space offered. Then click the “Use the following DNS server adresses” option on the same tab and enter the desired DNS server information. D-Link DIR-600 User Manual...
  • Page 71 7. Go to the Local Area Connection Status window and click the Details button. 8. Confirm your new settings on the Network Connection Status window. When you are finished, click the Done button. D-Link DIR-600 User Manual...

  • Page 72: Setting Up A Connection Or Network Wirelessly

    2. Go to the Set up a connection or network window and choose the Set up a wireless router or access point Set up a new wireless network for your home or business option. Click the Next button. D-Link DIR-600 User Manual...
  • Page 73 3. Click the Next button on the Set up a wireless router or access point window. 4. The following window displays the system progress. 5. This window confirms that you want to create wireless network settings that are savable to a USB flash drive. D-Link DIR-600 User Manual...
  • Page 74 Click the Show advanced network security options link. 8. Select security method on the Choose advanced network security options window in the Set up a wireless router or access point wizard. Click the Next button. D-Link DIR-600 User Manual...
  • Page 75 Insert the USB flash drive into this computer window in the Set up a wireless router or access point wizard to select a destination for your network settings. Click the Next button. D-Link DIR-600 User Manual...
  • Page 76 13.Once you are finished, the To add a device or computer, follow these instructions window in the Set up a wireless router or access point wizard opens. When you are finished, click the Close button. D-Link DIR-600 User Manual...

  • Page 77: Connecting To A Secured Wireless Network (Wep, Wpa-Psk & Wpa2-Psk)

    Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) The following are step-by-step directions to set up a wireless connection. 1. Click on Properties. 2. Click the Manage network connections link in the Network and Sharing Center window. D-Link DIR-600 User Manual...
  • Page 78 4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. The following Connect to a network wizard window displays the system progress. D-Link DIR-600 User Manual...
  • Page 79 Connect to a network wizard is displayed. Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-600 User Manual...
  • Page 80 Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-600 User Manual...

  • Page 81: Connecting To An Unsecured Wireless Network

    Connecting to an Unsecured Wireless Network The following are step-by-step directions to set up an unsecured wireless connection. 1. Click on Properties. 2. Go to the Network and Sharing Center window and click the Manage Network Connections link. D-Link DIR-600 User Manual...
  • Page 82 4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. Confirm your desire to connect anyway on the following Network Connection Status window. D-Link DIR-600 User Manual...
  • Page 83 Connect to a network wizard is displayed. Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-600 User Manual...
  • Page 84 Section 11 - Connecting to an Unsecured Wireless Network 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-600 User Manual...

  • Page 85: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
  • Page 86 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
  • Page 87 • Windows ® ® press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-600 User Manual...
  • Page 88 • To change the MTU enter the number in the MTU field and click the Save Settings button to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-600 User Manual...

  • Page 89: Wireless Basics

    Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 90: What Is Wireless

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 91 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 92: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like airports, hotels, coffee shops, libraries, restaurants, and convention centers.

  • Page 93: Wireless Modes

    An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-600 User Manual...

  • Page 94: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 95: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

  • Page 96: Technical Specifications

    Advanced Firewall Features • 64/128-bit WEP • NAT with VPN Pass-through (Network Address Translation) VPN Pass Through/ Multi-Sessions • MAC Filtering • PPTP • IP Filtering • IPSec • URL Filtering • Domain Blocking • Scheduling D-Link DIR-600 User Manual...
  • Page 97 * Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-600 User Manual...

  • Page 98: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 99 Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...

  • Page 100: Limitation Of Liability

    Appendix E - Warranty for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect.

  • Page 101: Copyright Statement

    This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.
  • Page 102 The Router must be used with the power adapter included with the device.Caution - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. 低功率電波幅性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使 用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電 機須忍受合法通信或工業、科學及醫療用電波輻射性電 機設備之干擾。 D-Link DIR-600 User Manual...

This manual is also suitable for:

Dir-600lDir-300

Table of Contents