Download Print this page
FUTABA CIU-2 Instruction Manual
Hide thumbs Also See for CIU-2:

Advertisement

Quick Links

Thank you for purchasing a CIU-2.
The CIU-2 is a USB interface for communications between Link supported devices and a Windows
computer.
Notes
Please read this manual thoroughly before using your CIU-2.
Store this manual in a safe place where it can be accessed at any time.
Reproduction of all, or part, of the contents of this manual without prior written permission is
prohibited.
The contents of this manual are subject to change without prior notice.
The contents of this manual should be complete, but if you find any errors or unclear points, please
contact us.
Futaba will not be responsible for the results of use of devices by the customer.
Specifications
(Specifications and ratings are subject to change without prior notice accompanying technological developments.)
Interface
: USB Rev1.1 compliant
USB connector
: USB Series A connector
Operating voltage : 5.0V ±0.2V (USB bus power)
Current drain
(At connection, idle): 12.3 ±2.0mA
*The PC must have a USB port (Type A).
Drivers and Link programs must be installed.
To use the CIU-2, drivers must be installed.
For communication and setting, Link programs corresponding to each device must be installed.
Install the drivers and Link programs available on the dealer's website.
Connecting and disconnecting the PC and CIU-2
Connection
1.Turn on the PC power.
2.Connect the CIU-2 to the USB port of the PC.
3.When the CIU-2 is first connected to the PC;
the "Found New Hardware Wizard" shown at
the right is displayed. Install the drivers
downloaded from the dealer' s website.
USB port
USB INTERFACE
*Windows is registered trademark of Microsoft Corporation.
Operating environment:
Dimensions
Weight
Applicable OS
Disconnection
The CIU-2 can be disconnected even while the
PC power is on. However, do not disconnect
the CIU-2 while it is communicating with a Link
supported device.
Instruction Manual
*A 500mm extension
cord is supplied with
the CIU-2.
Temperature -10 ~ 50degrees Celsius
: 18.2 X 56.5 X 9.0 mm
: 7.5g
: Windows Vista/XP/2000

Advertisement

loading

Summary of Contents for FUTABA CIU-2

  • Page 1 USB INTERFACE Instruction Manual Thank you for purchasing a CIU-2. The CIU-2 is a USB interface for communications between Link supported devices and a Windows computer. *A 500mm extension Notes Please read this manual thoroughly before using your CIU-2. cord is supplied with Store this manual in a safe place where it can be accessed at any time.
  • Page 2 Opening the case may damage the PC board. In this case, PC assembly replacement or repair will become impossible. There is also the danger of fire and electric shock. Do not expose the CIU-2 to water or other liquids. Do not touch the CIU-2 when you hands are wet.