FUTABA 12Z Series Instruction Manual page 89

Setting method
data input dial to the left and push the enter
(For a description of the switch selection method,
see the description at the back of this manual.)
the data input dial.
push the enter button to call the setup screen.
(For a description of the setup method, see the
description at the back of this manual.)
turn the
FLP 3
(Brake Flap) (Brake Flap)
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
V-TAIL
ELEVATOR
ELEVATOR 2
The rate and curve of each servo can be set by
calling each screen. (For a description of the
curve setting method, see the description at the
back of this manual.)
The servo speed can also be adjusted.
FLP 4
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
AILVATOR
ELEVATOR
ELEVATOR 2
<Model Menu (Airplane/Glider Functions)> 89