USER NAME
This function registers the T12Z user name.
A PIN can also be set to protect the set data or
user name.
[Return Key]
User name registration
*Select [USER NAME] and push the enter button. The setup
screen appears.
*A name of up to 12 characters can be entered as the user
name. (Space is also counted as 1 character.)
*[BS] erases the preceding character and [CL] erases the
selected character and all the following characters.
*When you want to stop input and return to the original state,
select [CANCEL] and push the enter button.
*Set the PIN carefully. When a system PIN is set, if you
forget the PIN, none of the settings can be changed. In this
case, the system must be reset by the Futaba Service Center.
When you want to protect user name/setting data
*When you want to prevent rewriting of the user name or
setting data, set a user ID by the following method.
*Use the cursor lever to select [SECURE MODE] and then
push the enter button. The security mode setup screen
appears.
*The secure mode can be changed even after the PIN number
is input.
<Functions of System Menu>
[Cursor Lever]
[Data Input Dial]
PUSH
[Enter Button]
33