Download Print this page

Delta Electronics Pulse Generator Card PG-02 Installation Instruction

Pulse generator card for vfd-b series

Advertisement

Quick Links

PG-02
Installation
1 to 2HP (0.75kW to 1.5kW)
7.5HP (5.5kW) and above
Pulse Generator Card for VFD-B Series

Installation Instruction

3 to 5HP (2.2kW to 3.7kW)
Control Terminals Block Designations
Connect to VFD-B
series control board
PG-02
Select the power
source and output
of Pulse Generator
2007-07-12
5011606104-PG E4
Wiring Terminals
FSW2 FSW1
OC
12V
5V
TP
A/O
B/O
COM
VP
DCM
A
A
B
B

Advertisement

loading

Summary of Contents for Delta Electronics Pulse Generator Card PG-02

  • Page 1: Installation Instruction

    PG-02 Pulse Generator Card for VFD-B Series Installation Instruction Installation 1 to 2HP (0.75kW to 1.5kW) 7.5HP (5.5kW) and above 3 to 5HP (2.2kW to 3.7kW) Control Terminals Block Designations Connect to VFD-B series control board Wiring Terminals FSW2 FSW1 PG-02 Select the power source and output...
  • Page 2 PG Card and Pulse Generator A. Basic Wiring Diagram R/L1 R/L1 S/L2 S/L2 T/L3 T/L3 PG-02 Factory Default PG-02 and Pulse Generator Connections C. When Pulse Generators is Open Collector type, please wire as following. R/L1 S/L2 T/L3 B. Basic Wiring Diagram with RPM Meter Attached.
  • Page 3 PG-02 Terminal Descriptions Terminals Terminal Symbols Power source of PG-02 (FSW1 can be switched to 12V or 5V) Output Voltage: (+12VDC ±5% 200mA) or (+5VDC ±2% 400mA) Power source (VP) and input signal (A, B) common Input signal from Pulse Generator. Input type is selected by FSW2. Maximum 500KP/Sec PG-02 output signal for use with RPM Meter.
  • Page 4 Types of Pulse Generators Types of Pulse Generators ASIA DELTA ELECTRONICS, INC. TAOYUAN Plant/ 31-1, SHIEN PAN ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN 333 TEL: 886-3-362-6301 FAX: 886-3-362-7267 FSW1 and FSW2 switches FSW2 FSW1 FSW2 FSW1 FSW2 FSW1 FSW2 FSW1...