Remote Control; Installing The Batteries For The Remote Control - Toshiba SD-V296 - DVD/VCR Owner's Manual

Remote Control

Installing the Batteries for the
Remote Control
Install two AA batteries (supplied) match-
ing the polarity indicated inside battery
compartment of the remote control.
1
2
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
infrared sensor window on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 23 feet (7m) within 30°
23 feet (7m)
23 feet (7m)
30˚
Note:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
• If you turn off this unit, [OPEN/CLOSE A] on
the remote control is not available.
Be sure to use [OPEN/CLOSE A] or
[ C/A (STOP/EJECT)] on the unit.
E8EB5UD_SD-V296KU_EN_ES_v1.indd 8 E8EB5UD_SD-V296KU_EN_ES_v1.indd 8
Media
Button
(Alphabetical order)
1 2 3
4 5 6
7 8 9
0 +10
A-B
ANGLE
AUDIO
CLEAR/
C.RESET
DISPLAY
DVD
ENTER
INPUT
SELECT
MENU
3
MODE
OPEN/CLOSE
PAUSE
PLAY
REC/OTR
REPEAT
RETURN
SEARCH
MODE
SETUP
SKIP
23 feet (7m)
30˚
SPEED
STOP
SUBTITLE
T-SET
TOP MENU
TRACKING TRACKING
VCR
ZOOM
DVD mode
• To turn the unit on/off. • To turn the unit on/off.
• To select chapter or title
• To select track or file directly.
directly.
• To search forward/backward
through a disc.
• To search forward/backward
• To begin slow forward/reverse through a disc. (CD)
playback in the pause mode.
• To repeat between your cho- • To repeat between your
sen point of A and B. chosen point of A and B. (CD)
• To select camera angles on a • To rotate a picture 90 degrees
disc. clockwise. (JPEG)
• To select audio languages on a • To select "STEREO", "L-ch" or
disc. "R-ch". (CD)
• To clear the markers. (CD)
• To remove status number in
• To clear the markers.
program input.
• To clear numbers entered
incorrectly. • To clear numbers entered
incorrectly.
• To cancel the point A for A-B
• To cancel the point A for A-B
repeat setting.
repeat setting. (CD)
• To display the current disc • To display the current disc
mode. mode.
• To select DVD output mode. • To select the DVD output mode.
• To activate DVD mode. • To activate DVD mode.
• To move the cursor and
determine its position.
• To move the cursor and deter-
mine its position.
• To call up the disc menu on a
• To call up the file list. (JPEG)
disc.
• To program the playing order
or play randomly.
• To set black level on/off. • To set virtual surround on/off.
• To set virtual surround on/off. (CD)
• To activate the Slide Show
mode. (JPEG)
• To open or close the disc tray. • To open or close the disc tray.
• To pause disc playback.
• To advance playback one • To pause disc playback.
frame at a time.
• To begin disc playback. • To begin disc playback.
• To play back a track or disc
• To play back a chapter or title repeatedly. (CD)
repeatedly. • To play back a file, folder or
disc repeatedly. (JPEG)
• To return to the previous • To return to the previous
operation in menu. operation in menu.
• To search track.
• To search chapter, title or time.
• To search time. (CD)
• To set or search the markers.
• To set or search the markers. (CD)
• To call up the DVD setup menu. • To call up the DVD setup menu. • To call up the VCR menu.
• To skip chapters or titles. • To skip tracks or files.
• To stop playback. • To stop playback.
• To select subtitles on a disc.
• To return to the top file of
• To call up the top menu on a
the highest hierarchy in the
disc.
program and file list. (JPEG)
• To magnify part of a picture. • To magnify part of a picture.
(2x/4x) (2x) (JPEG)
– 8 –
VCR mode
• To turn the unit on/off.
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
• To select "HIFI" or "MONO"
mode during playback.
(Hi-Fi tapes only)
• To exit the VCR menu.
• To reset the tape counter.
• To display the current time, tape
counter, "DISC", "L1" or "L2".
• To select an item on
the VCR menu.
• To advance to the
next VCR menu.
• To go back one step
• To skip files. (JPEG)
during clock and
timer programming.
• To select input "DISC", "L1"or
"L2".
• To eject the cassette tape from
the cassette compartment.
• To pause tape playback or
recording.
• To advance playback one
frame at a time.
• To begin tape playback.
• To start recording or one-touch
timer recording (OTR).
• To select the repeat mode on/
off.
• To call up the index or time
search menu.
• To select the recording speed.
• To stop playback or recording.
• To put the VCR into standby
mode for a timer recording.
• To adjust the tracking manually
during playback.
• To select the VCR output mode.
• To activate VCR mode.
2008/07/14 10:36:31 2008/07/14 10:36:31
EN