Connections; Connection To Rf Modulator (Not Supplied); Connection To A Tv - Toshiba SD-V296 - DVD/VCR Owner's Manual

Connections

If your TV has AUDIO/VIDEO input jacks, see the section "Connection to a TV" on this page. If not, it is still possible to connect this
unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.

Connection to RF Modulator (Not Supplied)

1) Disconnect the power cords of the devices from the AC outlet.
2) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO /
VIDEO input jacks of your RF modulator by RCA Audio/Video cables.
3) The antenna input jack of your TV may have been already
occupied. If so, disconnect the RF cable from your TV and then
connect the RF cable to your RF modulator (usually marked
"ANT IN").
4) Connect your RF modulator to your TV by another RF cable.
If your TV does not have AUDIO / VIDEO input jack.
Antenna
Cable
Signal
STEREO AUDIO / VIDEO RF Modulator
(commercially available)
AC 120V ANT IN
2

Connection to a TV

If your TV does not have AUDIO/VIDEO input jack, see the section "Connecting to RF Modulator (Not Supplied)" on this page.
VCR and Basic DVD Connection
analog audio
TV AUDIO IN
AUDIO IN
L
R
VIDEO IN
RCA audio cable
This unit
DVD/VCR
DVD
AUDIO OUT
AUDIO
OUT
L
DVD DVD/VCR VCR VCR
L
DIGITAL DIGITAL AUDIO S-VIDEO COMPONENT VIDEO OUT AUDIO OUT AUDIO IN AUDIO IN
AUDIO OUT AUDIO OUT OUT OUT
Y L L L
R
L
C / B R R R
P B
COAXIAL COAXIAL
R VIDEO OUT VIDEO IN VIDEO IN
C / R
P R
R
or
AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected
to a VCR, pictures may be distorted due to the copy protection system.
• DIGITAL AUDIO OUT (COAXIAL), DVD AUDIO OUT, S-VIDEO OUT and
COMPONENT VIDEO OUT jacks are only useful in DVD mode.
After connecting to your TV:
Press the input selector button (usually TV/VIDEO, INPUT or AUX)
on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture
does not appear, also refer to the manual accompanying your TV.
E8EB5UD_SD-V296KU_EN_ES_v1.indd 10 E8EB5UD_SD-V296KU_EN_ES_v1.indd 10
(Back of this unit)
DIGITAL
AUDIO OUT
CHANNEL TO TV VIDEO AUDIO
3 4 R L
RCA Audio/Video
(Supplied)
RF Cable
3
(commercially available)
standard picture
VIDEO IN
L
R
and
RCA video cable
VCR DVD/VCR VCR
VIDEO OUT
VIDEO OUT
5) Set your RF modulator's channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a modulator/antenna switch, set it according to
your RF modulator's manual.
6) Plug in the power cords of the devices to the AC outlet.
7) Turn on your TV and choose the same channel as you set the
RF modulator's channel 3/4 switch to. For more details,
follow the instructions supplied with the RF modulator.
DVD DVD/VCR VCR
COMPONENT
AUDIO S-VIDEO AUDIO OUT AUDIO IN
VIDEO OUT
OUT OUT
Y L L
L
C /
B
R R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C /
R
P
R
(Back of TV)
1
Cables
Antenna in jack
DVD's picture quality
good picture
S-VIDEO IN
or
S-video cable
DVD
DIGITAL COMPONENT
AUDIO S-VIDEO
VIDEO OUT
OUT OUT
AUDIO OUT
COAXIAL
S-VIDEO OUT
If your TV is compatible with 525 (480) progressive
scanning, and you want to enjoy that high quality picture
for DVD playing;
You must select the connection COMPONENT VIDEO OUT
above and progressive scanning mode. To set the mode, set
"PROGRESSIVE" to "ON" in "DISPLAY" menu, so that the "P. SCAN"
on the front panel display appears. Refer to pages 23-24 for
more details.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set "PROGRESSIVE" to "OFF"
either in "DISPLAY" menu or by pressing and holding
[ B (PLAY)] on the front of the unit on the DVD side for more
than 5 seconds, so that the "P. SCAN" on the front panel display
disappears.
– 10 –
Note:
• The quality of picture may become
poor if the unit is connected to an RF
modulator.
Available for DVD only
better picture
COMPONENT
VIDEO IN
Y
C B
or
C
R
component video cable
DVD
DIGITAL
AUDIO S-VIDEO
AUDIO OUT OUT OUT
COAXIAL
COMPONENT
VIDEO OUT
2008/07/15 16:14:58 2008/07/15 16:14:58
COMPONENT
VIDEO IN
Y
P B
or
P
R
COMPONENT
VIDEO OUT
Y
C /
B
P
B
C /
R
P
R
EN