Texas Instruments TI-36X Pro User Manual page 32

z is a multi-tap key that cycles through the variable
names x, y, z, t, a, b, c, and d. You can also use z to
recall the stored values for these variables. The name of the
variable is inserted into the current entry, but the value
assigned to the variable is used to evaluate the expression.
To enter two or more variables in succession, press " after
each.
%h recalls the values of variables. Press %h
to display a menu of variables and their stored values. Select
the variable you want to recall and press <. The value
assigned to the variable is inserted into the current entry and
used to evaluate the expression.
%{ clears variable values. Press %{ and
select 1: Yes to clear all variable values.
Examples
Start with
clear screen
Clear Var
Store
Recall
% s -
% {
1 (Selects Yes)
15 L z
<
% h
< F <
32