Texas Instruments TI-34 - MultiView Scientific Calculator User Manual page 42

ARGUMENT — A function does not have the correct number
of arguments.
DIVIDE BY 0 — You attempted to divide by 0.
DOMAIN — You specified an argument to a function outside
the valid range. For example:
• For xÑy: x = 0 or (y < 0 and x is not an odd integer).
• For Ñx: x < 0.
• For LOG or LN: x
• For tan: x = 90Ä, -90Ä, 270Ä, -270Ä, 450Ä, etc., and
equivalent for radian mode.
-1
• For sin
• For nCr or nPr: n or r are not integers
• For }: Entering a simplify value of 0; using a simplify
value of ‚ 1
EQUATION LENGTH — An entry exceeds the digit limits (88
for entry line and 47 for stat entries or constant entries); for
example, combining an entry with a constant that exceeds the
limit.
FRQ DOMAIN — FRQ value (in 1-var statistics) < 0.
OVERFLOW — You attempted to enter, or you have
calculated, a number that is beyond the range of the
calculator.
STAT — Attempting to calculate 1-var or 2-var stats with no
defined data points, or attempting to calculate 2-var stats
when the data lists are not of equal length.
CONVERSION —
• The conversion does not contain a list name (L1, L2, or L3)
followed by a conversion (for example, f ¶d).
• You attempted to enter a function (for example, L1 + 3).
SYNTAX — The command contains a syntax error, or has
misplaced functions, arguments, parentheses, or commas. If
using P, try using W.
0.
{
-1
or cos : |x| > 1.
10; attempting to simplify non-fractions.
E
0.
|
42