Set The Area Code; Registration; To Reset All Settings - Motorola L512BT User Manual

Dect 6.0 digital cordless phone with bluetooth and answering system
Table of Contents

Advertisement

3.23

Set the Area Code

1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE
.
3. Press MENU and enter the area code.
4. Press MENU to save.
3.24

Registration

Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use. Additional handsets must
be registered to the base before you can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION
.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES
NO
or
.
Using the phone
YES
4. Select
and press MENU to enter the registration
procedure as below:
1. Press and hold FIND for 4 seconds on base, and then
release.
2. Place the unregistered cordless handset on the base
or charger.
3. A confirmation tone is generated if registration is
HANDSET X
successful.
number of handsets and the phone goes back to idle.
To register an originally unregistered handset, follow steps 1
through 3 above.
3.25

To reset all settings

1. Press MENU and then VOL+ or REDIAL/VOL- to select
RESET SETTINGS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS
.
3. Press MENU to select
settings will be reset to default.
X
is displayed where
denotes the
YES
. Then all the personalized
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L511btL513btL514btL515btL502bt

Table of Contents